Holley 4150 HELP needed fast......

[protour73]

Originally Posted by Track Junky

Are you getting fuel? Possibly the filter? Check to see if any of the floats are stuck and check float levels.

Yes fuel is flowing well from the squirters, float levels are good!

Originally Posted by Sieg

Fresh gaskets on the new spacer?

How did you set the base timing?

3 changes - spacer, ignition, fuel fittings.......ignition would be my primary suspect, vacuum leak from spacer second.

Is the ignition properly grounded by MSD standards?

Fresh gaskets?....NO...I did reuse the old gaskets. Stopping at the local Speed Shop on the way home tonight for fresh gaskets.

I replacied another MSD distributer which had the exact same electrical hookups, so I would eliminate that possiblilty as I had no problems in the past.