Chris is just finishing up the 64 Chevelle hinges, and opted to let me try them out for final fitment.
Installation was very easy, the only snag is that I had to slightly trim a portion of the inner fender to clear the rear arm of the hinge, all cars may not need this. Took off about 1/4" here on each side....
The rest of the install was very easy. They have much more adjustment than my factory hinges, and on my car actually allowed the hood to open even further than stock. Quality is very nice, and I think it really makes a big difference in the underhood look.
Jody,
I just wanted to thank you for testing these out for us and letting us know what you think. We get a lot done but when we have to wait for cars to come back in it sucks. Its great to know we have this site where you guys can test and let us know what you think or how a part works. I might be able to get this car to SEMA and will check today if you are intersted in doing it in our outside spot?
__________________
Chris Fesler
Fesler Built - Scottsdale, AZ
Chris, do the camaro hinges allow the hood open more than stock ones ?? That would be really good reason for me to bay a pair
We are reworking them right now to do that so the answer will be yes, when we redesign them it will open up more if the cowl allows that is what we are working on now.
__________________
Chris Fesler
Fesler Built - Scottsdale, AZ
I just wanted to thank you for testing these out for us and letting us know what you think. We get a lot done but when we have to wait for cars to come back in it sucks. Its great to know we have this site where you guys can test and let us know what you think or how a part works.
Looks great Jody!! Really finishes off the motor compartment.
Looking forward to seeing what else you have coming out Chris. I now you have a 55 in the works so my curiousity is peaked!!