americanpowertrain really?

[Flash68]

Originally Posted by NOPANTS68

I'm impatient and not a very nice person, so I just save flaky vendors the agony. It's a service I provide them.

[Sieg]

Originally Posted by NOPANTS68

I'm impatient and not a very nice person

Victim restitution?

[GoolsbyCustoms]

All of this is really wild to me based all on all of our past experiences with A.P. including our last one I posted about yesterday in the vendor feedback section. I am definately not questioning anyones story here so dont take it the wrong way , but generally a "bad" company is bad across the board and not hit or miss, just my .02

[Bowtieracing]

I am allso in market looking for good clutch and flywheel kit for T56 /630 hp LSX . Recomendtion for vendor and parts?

[TheJDMan]

Originally Posted by Bowtieracing

I am allso in market looking for good clutch and flywheel kit for T56 /630 hp LSX . Recomendtion for vendor and parts?

Order from Summit and you will have no issues!!!

[TheJDMan]

Originally Posted by NOPANTS68

I'm impatient and not a very nice person.

Reminds me of, ME!

[DOOM]

Originally Posted by GoolsbyCustoms

All of this is really wild to me based all on all of our past experiences with A.P. including our last one I posted about yesterday in the vendor feedback section. I am definately not questioning anyones story here so dont take it the wrong way , but generally a "bad" company is bad across the board and not hit or miss, just my .02

Josh I do agree with your statement. Dennis had the same experience I did just a different guy. But I have to say judging by some of the Pm's and emails I've gotten I don't think it's so hit or miss with this place. I've beat this horse enough I'm happy your deal went well. I'm sure it will continue for you.

[RBR]

Originally Posted by mxer898

I am about to buy my t56 magnum for my 67 firebird (was a automatic)....I am looking for a complete kit and have talked to a few venders with american powertrain being one of them. I am curious who provided the best service and quality/fit for this purchase...who would you recommend for this?

Thanks,
Henry

Hurst has worked really well for me they give detailed installation instructions and have GREAT tech support, wish they were a vendor here.
DSE for other stuff is top notch. I bought a mastercylinder from them that was seeping brakefluid. Two years after I bought it I inquired about a rebuild kit. Their reply was a brand new M/C and a request to send my old one back with a prepaid shipping tag. Talk about standing by what they sell thats about as good as it gets! There are some turely great people and vendors on this site