Can you tell us a little bit on the tube chassis car you have there?
I'm sorry but I can't tell you much about it. It's going to be a Chevy C-10 Pickup and should debut in a couple of years! That's about all the info I'm able to tell.
Will keep you on the radar for a future trip, thanks.
Going to interesting shops gives some of the participants an inside view of cool projects that they normally wouldn't get to see. It also gets the shops some more visibility, from true car enthusiests, that they normally wouldn't get and hopefully they can get a customer or two out of the whole thing
Here's some recent pics with the new lift installed. I had been researching these lifts for a few years and almost pulled the trigger a couple of times. I have recently come into a situation where I need to store 4 vehicles so this unit ended up being the ideal solution. This is model HD9-SW 9000 lb capacity, 16 ft wide. The outer runways are fixed, but the inside pair are adjustable to the width of the cars being stored. 110V power supply and pneumatic release locks. Quality seems to be pretty good and it went together in about 6 hours. Here's a few pics.
__________________
69 SS396 Camaro Coupe, 4link, 12bolt posi, Speedtech LCA and UCA's, Hotchkis 2" drop springs and sway bar, Ridetech triple remote resevoir coilovers, Bilsteins, Wilwood 6 piston front/4 piston rear, Magnaflow stainless exhaust, Lemons Headers, Comp rollers/p-rods/cam, Fikse 18x8.5 and 18x10