...

Go Back   Lateral-g Forums > Technical Discussions > Chassis and Suspension
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 05-16-2022, 05:40 PM
ScotI ScotI is offline
Senior Member
 
Join Date: Feb 2005
Location: Dallas TX
Posts: 623
Thanks: 68
Thanked 165 Times in 122 Posts
Default Steering Box Ratio Options

Researching a new steering box for an early A/g-body (1978) that's street driven.

Front set-up parts include:
SPC upper a-arms
Speedtech Lowers
Tall BJ's
Hotchkis 1" drop/600# coils
Ridetech single adjustable front shocks
36mm GM WS6/IROC hollow sway bar
18x8 w/245-40-18's

Options I've found for tightening up the ratio are 12.7:1 & 10:1. The 12.7's are listed @ 3-4 turns lock-to-lock & 10:1's @ 2.5 LtL.

Are the 10:1 boxes too much (sensitive) for the street?
Thoughts?
Reply With Quote
  #2  
Old 05-16-2022, 08:39 PM
Pro Touring Store Pro Touring Store is offline
Lateral-g Supporting Vendor
 
Join Date: Oct 2021
Location: Easley, SC
Posts: 37
Thanks: 7
Thanked 20 Times in 13 Posts
Default

In my opinion, they're not too quick for the street.. But, they are quicker than anything else you've driven.
If your roads have a lot of crowns and your car hunts on them, the 10:1 may be a little harder to manage than others.. but just like anything, you'd get used to it.

If you're only driving it on the street then there's no point though.. Stick with the 12.7.

-Dale
__________________
Dale Schwartz

www.ProTouringStore.com
Reply With Quote
The Following User Says Thank You to Pro Touring Store For This Useful Post:
camcojb (05-16-2022)
  #3  
Old 05-16-2022, 09:47 PM
ScotI ScotI is offline
Senior Member
 
Join Date: Feb 2005
Location: Dallas TX
Posts: 623
Thanks: 68
Thanked 165 Times in 122 Posts
Default

Quote:
Originally Posted by Pro Touring Store View Post
In my opinion, they're not too quick for the street.. But, they are quicker than anything else you've driven.
If your roads have a lot of crowns and your car hunts on them, the 10:1 may be a little harder to manage than others.. but just like anything, you'd get used to it.

If you're only driving it on the street then there's no point though.. Stick with the 12.7.

-Dale
Well, it hasn't been cone hunting but it was also an original 48k mile car before the changes. The front suspension parts are getting updated/changed further (second round) & the steering box is leaking badly so it's prime for replacing while making the changes. The factory ratio is like a 17:1 so the decision is which one better compliments the updated parts.

I have a Squarebody crew-cab dually that takes corners like a 1/2 ton truck (lowered; -.5 Camber; 6.9/7.4 Caster; RedHead steering box; 4-bar rear set-up w/Spohn spherical joints) so I do appreciate 'spirited' drives regardless of the vehicle I'm piloting.

Several have suggested the 12.7 boxes because some Monte SS's, 442's, & GN's used them from GM but that was with OE suspension set-ups & specs. I figure my non-stock specs & parts combo might benefit from the 10:1 but don't have much experience w/them.

Last edited by ScotI; 05-16-2022 at 09:53 PM.
Reply With Quote
  #4  
Old 05-19-2022, 08:11 AM
Pro Touring Store Pro Touring Store is offline
Lateral-g Supporting Vendor
 
Join Date: Oct 2021
Location: Easley, SC
Posts: 37
Thanks: 7
Thanked 20 Times in 13 Posts
Default

Quote:
Originally Posted by ScotI View Post
Well, it hasn't been cone hunting but it was also an original 48k mile car before the changes. The front suspension parts are getting updated/changed further (second round) & the steering box is leaking badly so it's prime for replacing while making the changes. The factory ratio is like a 17:1 so the decision is which one better compliments the updated parts.

I have a Squarebody crew-cab dually that takes corners like a 1/2 ton truck (lowered; -.5 Camber; 6.9/7.4 Caster; RedHead steering box; 4-bar rear set-up w/Spohn spherical joints) so I do appreciate 'spirited' drives regardless of the vehicle I'm piloting.

Several have suggested the 12.7 boxes because some Monte SS's, 442's, & GN's used them from GM but that was with OE suspension set-ups & specs. I figure my non-stock specs & parts combo might benefit from the 10:1 but don't have much experience w/them.
Sounds like you sold yourself on 10:1 despite other peoples suggestions? Lol.
You won't benefit from a 10:1 is what I'm getting at. Despite your modifications. Autocross / tight turns are where you benefit from a 10:1 most. Street driving you may appreciate a 12.7 more since it'll be less twitchy / easier to recover.
__________________
Dale Schwartz

www.ProTouringStore.com
Reply With Quote
The Following User Says Thank You to Pro Touring Store For This Useful Post:
ScotI (05-24-2022)
  #5  
Old 05-19-2022, 08:57 AM
68454RS's Avatar
68454RS 68454RS is offline
Senior Member
 
Join Date: Mar 2019
Location: Huntington Indiana
Posts: 263
Thanks: 203
Thanked 201 Times in 96 Posts
Default

The real question is..... Where are you going to find a 10:1 box?
Reply With Quote
  #6  
Old 05-20-2022, 06:45 AM
ScotI ScotI is offline
Senior Member
 
Join Date: Feb 2005
Location: Dallas TX
Posts: 623
Thanks: 68
Thanked 165 Times in 122 Posts
Default

Quote:
Originally Posted by 68454RS View Post
The real question is..... Where are you going to find a 10:1 box?
Lares.
Reply With Quote
  #7  
Old 05-20-2022, 06:56 AM
ScotI ScotI is offline
Senior Member
 
Join Date: Feb 2005
Location: Dallas TX
Posts: 623
Thanks: 68
Thanked 165 Times in 122 Posts
Default

Quote:
Originally Posted by Pro Touring Store View Post
Sounds like you sold yourself on 10:1 despite other peoples suggestions? Lol.
You won't benefit from a 10:1 is what I'm getting at. Despite your modifications. Autocross / tight turns are where you benefit from a 10:1 most. Street driving you may appreciate a 12.7 more since it'll be less twitchy / easier to recover.
Wrong. I research stuff before making decisions though. The only thing I "sold myself" on was asking 'why?'.

The guys saying they run the 12.7 boxes are also running stock a-arms, stock alignment specs, stock spindle geometry, & using a GM spec'd box. That might be the 'go to' for a MCSS/442/GN for the coding but that coding doesn't mean much on a '78 Malibu that was never intended to be more than A-B transportation.

Since going through the aftermarket, the 10:1 is also available. I figured asking others w/performance/handling experience for insight would be the right move.
The statement in RED was info that makes sense. Thanks.

Last edited by ScotI; 05-20-2022 at 07:03 AM.
Reply With Quote
  #8  
Old 05-23-2022, 05:29 PM
Corey R. Corey R. is offline
Member
 
Join Date: Jan 2015
Posts: 57
Thanks: 22
Thanked 2 Times in 2 Posts
Default

I have a 12.7 box from TurnOne and while it’s is a high quality piece, I find myself having to really pay attention at highway speeds on longer early morning cars & coffee trips. Any bit of steering wheel movement translates into veering onto the dotted line. It would grow tiresome on a 1000+ mile Pro Touring trip.

I wish I would have stayed with my stock box, as it didn’t leak and I’m not into autocrossing where I need quick turning at low speeds. I read too much online and figured it was a obligatory upgrade to my LS swap.

Last edited by Corey R.; 05-23-2022 at 05:37 PM.
Reply With Quote
The Following User Says Thank You to Corey R. For This Useful Post:
ScotI (05-24-2022)
  #9  
Old 05-24-2022, 11:01 AM
SSLance's Avatar
SSLance SSLance is offline
Senior Member
 
Join Date: Oct 2013
Location: Peoria, AZ
Posts: 2,668
Thanks: 72
Thanked 337 Times in 211 Posts
Default

I've kicked the idea around of going to a 10:1 box when I replace mine but frankly, I don't think I will. I've grown very accustomed to the 12.7:1 and it does just fine for me...around cones and on the highway.
__________________
Lance
1985 Monte Carlo SS Street Car
Reply With Quote
The Following User Says Thank You to SSLance For This Useful Post:
ScotI (05-24-2022)
  #10  
Old 05-24-2022, 03:08 PM
UMI Tech's Avatar
UMI Tech UMI Tech is offline
Member
 
Join Date: Dec 2014
Location: Central PA
Posts: 71
Thanks: 2
Thanked 9 Times in 7 Posts
Default

We have 8:1 on the UMI autocross cars and 12.7:1 on our Power Tour car. Having experience with both, I'm really itching to split the difference and try 10:1 on the street. I think it would be pretty awesome if you're into the quick steering thing. The 8:1 is pretty whack until you get used to it.
Reply With Quote
The Following User Says Thank You to UMI Tech For This Useful Post:
ScotI (05-24-2022)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net