...

Go Back   Lateral-g Forums > Technical Discussions > Shop & Equipment
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 11-30-2007, 03:01 PM
Birdman's Avatar
Birdman Birdman is offline
Senior Member
 
Join Date: May 2007
Location: Raleigh, NC
Posts: 285
Thanks: 0
Thanked 0 Times in 0 Posts
Default Shop lighting options

The light in my shop is attrocious. It seems like I am always finding spots in the garage that are dark, and always where I need light!

I have three 2-bulb flourescent shop lights hanging in the front part. They give ok light in the front, but the back of the garage is about as dark as it can get, especially with the garage door open.

I am going to add another flourescent under the shelf over the workbench to light up that area a little better, but I really need to get more light into the back of the garage.

Anyone have any suggestions? I had planned on adding another 3 2-bulb shop lights, but when the door is open it'll still be dark.

It is very frustrating, I pretty much have to have a drop light everywhere I am in the garage.
__________________
1998 Trans Am - BMR drop springs, BMR LCA relos, Bilstein shocks, Sportmax 18x9.5 wheels, lots of goodies, 6-spd swap, lQ9 swap
1968 Camaro (Patriot Dream project) - Iron LS1, T56, lowered and nitroused PT machine
PatriotDream.org - Help make a soldier's dream come true
Reply With Quote
  #2  
Old 11-30-2007, 03:15 PM
68protouring454's Avatar
68protouring454 68protouring454 is offline
Senior Member
 
Join Date: Jul 2004
Posts: 1,593
Thanks: 0
Thanked 1 Time in 1 Post
Default

8 ft 4 bulb fluorescents
__________________
Jake's Rod Shop
Reply With Quote
  #3  
Old 11-30-2007, 04:29 PM
bulldog19 bulldog19 is offline
Senior Member
 
Join Date: Oct 2007
Posts: 244
Thanks: 8
Thanked 5 Times in 4 Posts
Default

Go with 8' 2-tube High Output strips. Each Tube is 110w, ballast is rated for cold temps so when you turn on during the winter and the garage is not heated they are still nice and bright. Expect to pay around $85 for the fixtures with the tubes. Plus also now they have an electronic ballast so the "hum" of the ballast is almost non existent.
__________________
John
68 Camaro RS Convertible Dual Quad 406 TKO600 Hotchkis TVSS SOLD
Reply With Quote
  #4  
Old 11-30-2007, 10:03 PM
bigtyme1's Avatar
bigtyme1 bigtyme1 is offline
Senior Member
 
Join Date: Aug 2006
Location: Stewartstown PA
Posts: 1,777
Thanks: 0
Thanked 3 Times in 3 Posts
Default

Quote:
Originally Posted by bulldog19
Go with 8' 2-tube High Output strips. Each Tube is 110w, ballast is rated for cold temps so when you turn on during the winter and the garage is not heated they are still nice and bright. Expect to pay around $85 for the fixtures with the tubes. Plus also now they have an electronic ballast so the "hum" of the ballast is almost non existent.
I've got 14 of these lights in a 36x34 area, my garage is sectioned off. plenty of light and have not changed a bulb in 6 years.
__________________
69 RS Ragtop
[email protected]
Will trade wife for parts!!!
Reply With Quote
  #5  
Old 12-01-2007, 07:41 AM
mark smith mark smith is offline
Member
 
Join Date: Jan 2005
Posts: 73
Thanks: 0
Thanked 0 Times in 0 Posts
Default

does the shop have a ceiling in it? mine did not have the dry walled ceiling in it for awhile due to running a/c lines and for storage purposes.after installing ceiling and painting it with a bright white paint the lights seemed to work alot better.my shop is 30 by 30 with 10 ft ceilings and i have 8 4 ft fast start flourecsents.still have a one area that could use a little more light but for now im pretty happy.
Reply With Quote
  #6  
Old 12-01-2007, 09:39 AM
mazspeed's Avatar
mazspeed mazspeed is offline
Senior Member
 
Join Date: Jul 2005
Location: Campbell Ca
Posts: 2,005
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by bulldog19
Go with 8' 2-tube High Output strips. Each Tube is 110w, ballast is rated for cold temps so when you turn on during the winter and the garage is not heated they are still nice and bright. Expect to pay around $85 for the fixtures with the tubes. Plus also now they have an electronic ballast so the "hum" of the ballast is almost non existent.

These are the ones to go with. Not the most efficient, but good for cold weather garage lighting.
Reply With Quote
  #7  
Old 12-03-2007, 02:49 PM
Birdman's Avatar
Birdman Birdman is offline
Senior Member
 
Join Date: May 2007
Location: Raleigh, NC
Posts: 285
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thanks guys, I'll check into that. My shop is smaller, about 24x22, so a few of those should work great.
__________________
1998 Trans Am - BMR drop springs, BMR LCA relos, Bilstein shocks, Sportmax 18x9.5 wheels, lots of goodies, 6-spd swap, lQ9 swap
1968 Camaro (Patriot Dream project) - Iron LS1, T56, lowered and nitroused PT machine
PatriotDream.org - Help make a soldier's dream come true
Reply With Quote
  #8  
Old 12-04-2007, 02:20 PM
Silver69Camaro Silver69Camaro is offline
Senior Member
 
Join Date: Nov 2005
Location: Auburn, WA
Posts: 270
Thanks: 0
Thanked 0 Times in 0 Posts
Default

My 32x22 uses 14 4' double bulb T8 lamps. Lots of light. Almost like a surgical facility.

But the T8 bulbs are the way to go, hands down. No more T12 for me.
__________________
Matt Jones
Mechanical Engineer
Art Morrison Enterprises
Reply With Quote
  #9  
Old 12-04-2007, 02:32 PM
Birdman's Avatar
Birdman Birdman is offline
Senior Member
 
Join Date: May 2007
Location: Raleigh, NC
Posts: 285
Thanks: 0
Thanked 0 Times in 0 Posts
Default

The main problem I have is the garage door blocking out most of my light. It takes up like half the garage ceiling when it is opened, and any lights above it are blocked out. I might run a couple of lights on the wall to the sides of it.
__________________
1998 Trans Am - BMR drop springs, BMR LCA relos, Bilstein shocks, Sportmax 18x9.5 wheels, lots of goodies, 6-spd swap, lQ9 swap
1968 Camaro (Patriot Dream project) - Iron LS1, T56, lowered and nitroused PT machine
PatriotDream.org - Help make a soldier's dream come true
Reply With Quote
  #10  
Old 12-06-2007, 03:41 PM
29od1 29od1 is offline
Junior Member
 
Join Date: Apr 2006
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I have a 40'x60' shop with 12-8' T8 light strips. Each 8' strip has 4-4' T8 bulbs. Lighting is great and very efficient. The old T12 bulbs suck way too much power for what they output.

The strips will cost you about $40 from Lowes and 4-bulbs is about $9-$10. They're already set up for cold weather start.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:38 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net