im considering liquidating some of my projects (Im tired) and just trying to see what its value is these days..
here is part of the build thread..
https://lateral-g.net/forums/showthread.php4?t=24122
sorry to the scatteredness of this thread.. like i said im just tired of thinking about it..
Body
-69 camaro sitting in primer and it has already been jambed with gm red.
-new floors pans were installed as well as a rear package tray and deck lid
-it appears some where along the line some one patched the rear quarters( ive owned the car for over 6 years now and its never cracked or bubbled so i didnt worry about it).
-the front clip is assembled but not on the car
-i have all the moundings/trim, etc
-custom adjustable spoiler
-shaved rear panel
-smoothed bumpers
-the interior is pretty much stock but its rough
Drive train
-6.0L/edelbrock cam/edelbrock springs/comp pushrods/ ARP rodbolts (LQ4 with 67K)
-JESEL lsx ss shaft mount rockers with comp push rods(not installed
-Edlebrock performer rpm intake
-MSD6010 ingnition box (not installed)
-Auto craft pan and pickup
-Hooker super comp ceramic coated long tubes
-custom acc bracket setup for the fbody, the engine is as far back and as low as it can go
-4L80E(stock )
- Ford 8.8 rear/373's/Discs-(not installed) it has already had the control arm brackets removed and i will provide the spring perches to make it work on the car
Front Suspension
- Speed-tech upper and lower A-arms
- Hotchkiss 1-1/8 hollow sway bar
- QA1 12 way shocks
- 650LB springs with ajustable cups
- Hotchkiss tie rod sleeves
Rear Suspension
-Stock
Chassis
-Iroc steering box
-half height solid bushings
-integrated subframe connectors
-Transdapt 1" set back plates
Front Brakes
- Willwood 7/8's manual master
- 12" LS1 brakes for the front
- Slotted and cross drilled rotors
Wheels
-Some roller 17/18 corvette wheels with the right 2" adapters
-will also include some 19x8.5 and 19x9.5 mesh wheels. very nice wheels with no rash or issues
-also have a newer abs plastic caprice gas tank(not installed)
the car will need- a front winshield and a computer to control the trans and some decent rear suspension. i have alot of time and research and blood sweat and tears in this car. i just really dont have the time to finish this one out. most of the research has been done and parts have been gathered. it shouldnt take much to get this thing on the road..