Quote:
Originally Posted by Vegas69
I'd be looking for areas where your fuel line is getting too warm. Even with fuel injection you can get heat soak. Also, look at your fuel pressure and make sure your tank is venting properly.
|
Thanx for the info Todd I'm on it!
Quote:
Originally Posted by will69camaro
Vaporlocking in the rails? How is your fuel system routed. What fuel? I had zero starting issues with 93 and only a small delay when starting on E85.
|
Will I'm running VP 100 I'm going to look at the routing this week.
Quote:
Originally Posted by carbuff
Do you have a fuel pressure gauge?
Hard start can be a bit tricky. In the Holley, you have to get the air/fuel set somewhat manually with the IAC opening and startup fuel. The tables are based on CTS, and take some experimenting.
Also, the Holley has a fixed timing advance for starting. Where is that set?
|
I do have a gauge I just have to find out what the pressure should be. This Holley EFI is all new to me . Glade I have you guys!