...

Go Back   Lateral-g Forums > Technical Discussions > Trucks
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 02-02-2017, 11:12 PM
67pro-street 67pro-street is offline
Senior Member
 
Join Date: Aug 2010
Location: Bellingham, WA
Posts: 128
Thanks: 2
Thanked 5 Times in 4 Posts
Default 72 Chevy shortbed -- quick build!

Hi all,

I bought a 72 shortbed a few years ago about a mile down from my house. It was a pretty cool looking truck that was originally from California. It had awesome patina and I had to buy it. The truck was rough to say the least, but at least as rust went it was pretty minimal. I originally bought the truck with hopes of doing a full rebuild but then I realized how cool that patina was and wanted to keep the body as original as possible. I bought another truck with a 402 BB and took the motor out of that. I put in the typical cam/intake/carb setup from Edelbrock that Jegs sells as a kit, and then installed a noisy gear drive for good measure. Installed some flowmaster 40's and build the wood bed from scratch. I used a pretty cool method on the wood bed. It's a Japanese method where you burn the grains in the wood and then sand it down, then burn the grains and sand it down...so on and so forth. I also had a try at patina paint by transforming the white door to make it match the rest of the truck. Anyways, here are some photos! I'd love to hear some comments good or bad...I've got thick skin so lay it on me!

-Aman
__________________
-Aman

1969 Camaro Z/28: W.I.P. Bolt-on Art Morrison MaxG Chassis, LS2 Stroker, 6spd. manual, amongst many other goodies!
Reply With Quote
  #2  
Old 02-02-2017, 11:19 PM
67pro-street 67pro-street is offline
Senior Member
 
Join Date: Aug 2010
Location: Bellingham, WA
Posts: 128
Thanks: 2
Thanked 5 Times in 4 Posts
Default

As I bought it.
__________________
-Aman

1969 Camaro Z/28: W.I.P. Bolt-on Art Morrison MaxG Chassis, LS2 Stroker, 6spd. manual, amongst many other goodies!
Reply With Quote
  #3  
Old 02-02-2017, 11:35 PM
67pro-street 67pro-street is offline
Senior Member
 
Join Date: Aug 2010
Location: Bellingham, WA
Posts: 128
Thanks: 2
Thanked 5 Times in 4 Posts
Default













__________________
-Aman

1969 Camaro Z/28: W.I.P. Bolt-on Art Morrison MaxG Chassis, LS2 Stroker, 6spd. manual, amongst many other goodies!
Reply With Quote
  #4  
Old 02-02-2017, 11:37 PM
67pro-street 67pro-street is offline
Senior Member
 
Join Date: Aug 2010
Location: Bellingham, WA
Posts: 128
Thanks: 2
Thanked 5 Times in 4 Posts
Default

First step was to order a lowering kit from early classic enterprises and get the stance a little better...









__________________
-Aman

1969 Camaro Z/28: W.I.P. Bolt-on Art Morrison MaxG Chassis, LS2 Stroker, 6spd. manual, amongst many other goodies!
Reply With Quote
  #5  
Old 02-02-2017, 11:40 PM
67pro-street 67pro-street is offline
Senior Member
 
Join Date: Aug 2010
Location: Bellingham, WA
Posts: 128
Thanks: 2
Thanked 5 Times in 4 Posts
Default

Next step was to put the big block in. I hope these videos work...

With the engine, as well as everything else on this truck i tried to keep as much of the original patina and wear on it as possible. I wanted this truck to look and seem like the most badass sleeper around. To most, it would seem like a crappy old truck, but to those that know...well..there was much more than meets the eye!

__________________
-Aman

1969 Camaro Z/28: W.I.P. Bolt-on Art Morrison MaxG Chassis, LS2 Stroker, 6spd. manual, amongst many other goodies!
Reply With Quote
  #6  
Old 02-02-2017, 11:46 PM
67pro-street 67pro-street is offline
Senior Member
 
Join Date: Aug 2010
Location: Bellingham, WA
Posts: 128
Thanks: 2
Thanked 5 Times in 4 Posts
Default

Finally, I had to deal with the ugly white door, aka the white elephant in the room...

This was my first ever attempt at trying to achieve patina. I was also using paint off the shelf, so I had to get creative by using two different colors of orange to try and achieve the same color as the truck. Keep in mind that the passenger side of the truck was painted at some time in the past, so it was already a different shade then the rest. Instead of trying to match the rest of the truck, I attempted to match just that side of the truck. Given my paint limitations, I think it did alright. I also transferred the logo from the driver's side to the passenger side. A crude attempt at it, but that's exactly what I wanted because you could still see the brush strokes on the driver side from when the logo was originally painted on.















__________________
-Aman

1969 Camaro Z/28: W.I.P. Bolt-on Art Morrison MaxG Chassis, LS2 Stroker, 6spd. manual, amongst many other goodies!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net