My 67 Eternity Project Camaro

[Tony V]

ok as i mentioned earlier things move relatively slow but i've vowed to make some progress....actually foregoing my annual SEMA outing to focus on the car...

here's some pics... lots of deliveries lately....3rd member with wavetrac and 35 spline axles


T56 magnum waiting for the install


housing fully assembled.....




Now i had to get the bottom ready for Lizard Skin....used an etching primer first then went to a build primer to assure i had a barrier between metal and Lizard Skin...LS is water base and you had to assure there's no metal contact.







i decided to paint the bottom to cover the LS with a single stage urethane per the recommendations from the rep....i'm going with a gray color similar to the Trans Am Racing look which i'll do inside the hood also...

I'll have picture shortly on how the paint came out...
also working on door skins in between coats..
Heads arrived this week along with the intake so i'll be heading out to the machine shop to start the engine build but i was shocked how expensive 1 ga of single stage urethane cost....$350 WOW trips like that will delay engine hardware....

shooting for Monday to put the car back on wheels (actually they're just rollers but nevertheless) haven't been on wheels for 13 yrs!!!!!!! just painted the DSE quad links to match the rear end housing so maybe i'll have some good pics of progress next wee.

Also i had a good friend come over to help roll the qtr panel lip....came out wonderfull and he did with a body and hammer and metal file...it was like watching someone doing sculpting... i'll have pictures also...