1969 Speedtech Equipped Pro Touring Camaro

[garickman]

I forgot to mention this before, but I am using the fiberglass deck lid cover which I purchased from BBT Fabrications. It is a decorative cover for the underside of the trunk lid. It is a very nice piece and with a little bit of trimming it fit perfect. Rather than using exposed fasteners to hold this piece on, I will be using velcro at the top and the trunk hinges will secure it at the bottom. The fiberglass cover is just over 1/8" thick which posed a problem because it raised the deck lid up that amount in the rear when it is closed. We removed the stock trunk hinges and cut 1/8" from the center so the deck lid would close like stock again. With the additional weight of the cover, body filler, and the steel fabricated spoiler, we modified the stock hinges further to accept a set of gas struts which were purchased from the Ring Brothers. This made it very smooth to open the trunk and keep it open with the additional weight. I am also using a polished stainless steel trunk striker from Mad Mooks.









Here is a link to the trunk striker.

https://madmooks.com/67-69-camaro-trunkstriker