...

Go Back   Lateral-g Forums > Technical Discussions > Shop & Equipment
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 03-12-2018, 10:36 AM
Trick-Tools.com's Avatar
Trick-Tools.com Trick-Tools.com is offline
Member
 
Join Date: Jan 2018
Location: Pella Iowa
Posts: 56
Thanks: 16
Thanked 27 Times in 17 Posts
Default Proline Portable Planishing Hammer

Proline Portable Planishing Hammer




The ProLine Portable Pneumatic Planishing Hammer is designed for forming and smoothing compound curves in sheet metal. It is used in many industries, including automobile and aircraft restoration, race car fabrication, sheet metal stamping shops, artistic applications, etc. A ProLine planishing hammer takes the work out of metal work and saves the metal worker hours of time, leading to increased production.
One huge advantage with the design of the ProLine hammers is the foot pedal activation. By pressing the foot pedal down once the material is in place, you bring the dies together and start the air motor in one step. This not only allows for easy removal of your part when open, but gives very precise control of the pressure and allows for feathering off at the end of a shape. This is not possible with most planishing hammers that have a fixed die gap.
This portable unit features a heavy cast base that absorbs vibration and gives a stable work platform while the tip back wheels make it easy to move around the shop. The purpose built air motor head can be easily removed to fit an optional hand-held yoke or this unit can be converted to a hand-held hammer for use off of the mounting stand with an optional hand trigger. ProLine hammers use CP style tooling.
ProLine planishing hammers are completely fabricated in the USA. If you are looking for quality, then you have found the finest planishing hammers made.

https://www.trick-tools.com/ProLine-...g-Hammer-11537

Warranty:
1 year manufacturer's warranty

Specs:
•Throat Height (inches): 12.375
•Throat Depth (inches): 22
•Radius (inches): 3, 12, 36
•Air Consumption: 0-6.5
•Air Pressure: 125 psi
•Weight (pounds): 300

Includes:
Upper die
3R, 12R and 36R lower dies
Die extraction tool
Dead blow mallet
Oil and special oil bottle
Stainless steel engraved die rack with grommets
Air regulator and oiler assembly
__________________
Brycen Smith


[SIGPIC][/SIGPIC]

Last edited by Trick-Tools.com; 01-07-2019 at 09:01 AM.
Reply With Quote
The Following User Says Thank You to Trick-Tools.com For This Useful Post:
camcojb (03-12-2018)
  #2  
Old 01-07-2019, 09:01 AM
Trick-Tools.com's Avatar
Trick-Tools.com Trick-Tools.com is offline
Member
 
Join Date: Jan 2018
Location: Pella Iowa
Posts: 56
Thanks: 16
Thanked 27 Times in 17 Posts
Default

OPTIONAL TOOLING:

ProLine 18 Piece Planishing Hammer Die Kit

dies made from polished and hardened S7 tool steel. The 18 piece kit completes the full set of available dies when purchased with any ProLine Planishing Hammer.
2.375 OD flat face top die
1.5 OD reverse curve top die
1.5 OD lower bottom dies (.78, 1, 1.5, 2, 4, 5, 6, 9, and 24 inch radius and flat)
2.0 OD lower bottom dies (12, 24, 36 inch radius)
Linear stretch die
Rectangular die (.875 x 2.5; 24R x 4R approximately)
Square die (flat with one edge .3R approximately)


ProLine Cast Aluminum Hand-Held Planishing Hammer Yoke



ProLine Tubular Hand-Held Planishing Hammer Yoke 90-120-60




ProLine Tubular Hand-Held Planishing Hammer Yoke 90-90-90

__________________
Brycen Smith


[SIGPIC][/SIGPIC]
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:28 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net