Let me try this again!! I had this whole update done and was checking for spelling clicked behind a word to add an s...... wiped the whole this out. I've made dumb mistakes before but this is twice in two days.. Light a candle for me I'm about to launch the keyboard into the fish tank.
OK the wiring for the digital Dakota controllers to the gauges is done accept for re installing it once the wiring behind it for other things is done.
These are earlier pictures.
The NuRelic wiring for the power windows is in, the door boots and wiring for the motors is all in. As far as the switches go, I'm putting four in the console so I can control them all. I also picked up two extra with harnesses to install at each rear window. For back seat drivers to cool they're jets.
The console will have power going to the shifter for the buttons for the line lock when I install the solenoid. There will also be Key on power and one always hot too. I'll be installing a couple of phone chargers.
These A/C and heater hoses will be covered in expandable braid to help match the other hoses and wiring
The dimmer for the Dakota gauges are down where the emergency brake handle would be. You can see it to the lower left, it's aluminum now but will be changed to something the size of a tire valve cover in black.