Project FNQUIK - Page 60 - Lateral-g Forums

**waynieZ** · #**591** 03-05-2012, 06:37 PM

Thanks every body for kind words.
G356 I'll do a test area to see how it looks. Thanks

**tones2SS** · #**592** 03-05-2012, 08:10 PM

Good job Wayne!
Do you think you'll have the car done for this coming summer?

56pickup · #**593** 03-05-2012, 08:58 PM

Looking good Wayne!

Rick D · #**594** 03-05-2012, 09:57 PM

Quote:

Originally Posted by waynieZ

When you paint something that is galvanized do you have to remove it before painting, or is there an adhesion promoter you can use. Its for the floor plugs.
Thanks

Wayne, just make sure to use an etch primer before you paint the plugs or it will fail down the road.

awr68 · #**595** 03-06-2012, 12:06 PM

Looking great Wayne!! Keep the updates coming!!

**Spiffav8** · #**596** 03-07-2012, 07:45 PM

Wow...just read all 61 pages.

I want more!

Great to see you really going after it and getting things done.

**waynieZ** · #**597** 03-07-2012, 09:41 PM

Thanks everyone! I'm waiting on some small parts and my buddy who is helping me has some stuff to do to his car he changing from a spool to a posi unit in his Camaro. So as long as he needs to work on his car I'll be there if he needs me even just to hand him tools.
I needed some end lugs for my battery cables. I went to two electrical supply houses and neither had them. I couldn't believe it. So I tried Home depot and Lowe's two ace hardware stores. Nothing! I had to order them on line.
I worked in construction and we would kick them out of the way on the floors before the electricians cleaned up for the day. so it was hard to believe no one had any.I even stopped a electrical contractor still a no go.
Curtis Thanks and I wish you had to read 20 more pages it would mean I would be closer to the first start up.lol

**John510** · #**598** 03-07-2012, 09:44 PM

Nice trunk Wayne

**waynieZ** · #**599** 03-07-2012, 09:47 PM

Thanks John; still waiting on a couple more cans to finish. Should be here tomorrow.

**waynieZ** · #**600** 03-16-2012, 11:06 PM

I finally finished the trunk paint. ( g356speed ) the Eastwood clear is quite glossy. It came out pretty good. I'm glad to be done with it. The first set of cans I did without a mask. Wow strong stuff. We installed the 1/0 power cables from the Kill switch to the panel pass through on the passenger floor. There is extra slack to put them into the tray where they go through the back panel.Then put the rear harness in a split loom and ran it to the trunk. I need to get a crimper to install the old style GM terminals.
Here are a few pictures.

Next will be more wiring.