It is but it will take some time and patience. If they are not completely shot it might be easier to section in pieces of the replacement. Hopefully the car is not in final paint.
Using an air file to grind away the spot welds will avoid trying to drill them out where access is limited. Doesn’t damage the panel you are keeping either.
Don
The Following User Says Thank You to dhutton For This Useful Post:
Using an air file to grind away the spot welds will avoid trying to drill them out where access is limited. Doesn’t damage the panel you are keeping either.
Don
IF used properly. It is very easy for beginners to do it wrong and end up with a divot in the bottom panel. It needs to be done carefully.