Quote:
Originally Posted by nicks67ca
Do you plan on running independent fans per HX? If your constantly moving no issue but if you see any stop and go traffic the IAT heats up quickly.
FWIW my core size is 22" wide x 9" high x 3" deep and i have no IAT issues mounted on the lower half of the radiator opening
Also if you can calculate the needed BTU/hr Setrab has a pretty good data base.
http://www.setrabusa.com/products/oi...ine/index.html
|
I was planning a small brushless fan on each one for when stopped or in traffic.
The aftermarket ZR1 HX I found was 22"x16.5" so thats what I was going off of and I think it said 31,000 BTU. Going 11"x17" was a little more frontal area so I should be ok with that.
Can you use a oil cooler for a supercharger HX? They have a few that are smaller, but a higher BTU.