LS wiring harness ?

[Toddj1969]

Hi everybody, I'm new to this site. I am building a Pro Touring 69 Camaro with full Ride Tech front and rear suspension, DSE mini tubs and 2002 LS1 with a 4l60e out of a 2002 Camaro. My question is I am laying out my PSI harness and I cant decide were to drill the 2" hole through the fire wall. Can someone post some pics of this. I also am planning on putting a Vintage Air unit in also and don't want it to interfere with that. Thanks

Todd

[Toddj1969]

Come on guys. No one has any pics ?

[Vega$69]

Actually PSI on their instructions show where to drill the hole.

6.1 Mark the position where the wiring harness will come through the firewall with a metal punch.
(Typically near the passenger side cylinder head) Using a 2” hole saw, drill a hole in the firewall.
Make sure to debur the hole with a file.

That's where i drilled mine. Just about 1" outboard of where the head meets the block

[6T9LSX]

Found this thread...

http://www.pro-touring.com/threads/1...o-LS-Swap-guys

[Toddj1969]

Thanks guys, keep it coming. Are you running vintage air vega$69?

[Sheck44]

Todd
I routed mine above the Vintage Air unit which allowed me to pass the main harness wires over top of the unit to the ECU located above the glove box.

[Vega$69]

Originally Posted by Toddj1969

Thanks guys, keep it coming. Are you running vintage air vega$69?

Yes I am

[Vince@Meanstreets]

Originally Posted by Sheck44

Todd
I routed mine above the Vintage Air unit which allowed me to pass the main harness wires over top of the unit to the ECU located above the glove box.

Sheck.....what grommet is that? Source please.

[Toddj1969]

Thanks for the pic Vince. I take it that's a LS3? What kind of HP is it making to the wheels?

[dhutton]

Originally Posted by Vince@MSperfab

Sheck.....what grommet is that? Source please.

Speartech has a grommet similar to that:

http://www.speartech.com/product_p/grommet.htm

Don