Quality plating shops? - Lateral-g Forums

Musclerodz · #1 08-23-2009, 11:51 PM

Besides Advance and Paul's, what else is out there comparable but a little more affordable? I have 3 customer cars needing bumpers and other misc custom plating done, and while they will pay for quality, they don't want to spend anywhere near $1k a bumper.

Ron Fox · #2 08-24-2009, 07:55 AM

I am in Tennessee and most everyone talks about Adance but there is also another business called S&H Chrome Plating and Powder. Address is:

817 Madison Industrial Rd.
Madison, TN 37115
(615) 865-0100

This business is in the Nashville area. I am not to the point of restoring my chrome so I have not done my homework on local chrome shops and do not know anything about S&H. I see S&H at some of the car shows here in the area.

Thanks.

dhutton · #3 08-24-2009, 11:15 AM

I used these guys in south Dallas. Not on the same level as Advanced but they only charged me $250 for each of the bumpers on my 69 Firebird and they both needed straightening. I would recommend that you blast the backs of the bumpers if they are rusty since they didn't do it on mine. They turned them around in a week.

If you are considering them I recommend you get them to do a test bumper to make sure you are happy with their quality since my build is nowhere near show quality.

http://www.bestbumper.com/

DRJDVM's '69 · #4 08-24-2009, 11:29 AM

Sherms in Sac CA, but they are expensive too.... they quoted me about $1k a bumper and that was after $250 to straighten them out.

BBC71Nova · #5 08-24-2009, 11:59 AM

Wow! I was planning on having my factory bumpers rechromed. Having heard of Advanced and since they were within driving distance that's who I assumed I would use. I had no idea that it was costing $1k to have that done

. Guess I better look at other options. I'll for sure be interested in what you guys find out.

John

GM Muscle · #6 08-24-2009, 03:50 PM

Quote:

Originally Posted by dhutton

I used these guys in south Dallas. Not on the same level as Advanced but they only charged me $250 for each of the bumpers on my 69 Firebird and they both needed straightening. I would recommend that you blast the backs of the bumpers if they are rusty since they didn't do it on mine. They turned them around in a week.

If you are considering them I recommend you get them to do a test bumper to make sure you are happy with their quality since my build is nowhere near show quality.

http://www.bestbumper.com/

that is who we use. and the do quality work, they will stand behind their work too. we buy/send a lot of bumpers from them. anything from urethane to chrome..