LSA with speedtech subframe

[ironworks]

[GRob]

Wegner has a setup under development.

[cwylie]

Wegner does for an LSA?

[jimmythehand]

Does anyone know anything about the setup from street and performance? It looks like from the picture on bottom left, that the a/c and alt are both relocated up, so notching would not be needed.

http://www.hotrodlane.cc/lsasetups.jpg

[ironworks]

Originally Posted by jimmythehand

Does anyone know anything about the setup from street and performance? It looks like from the picture on bottom left, that the a/c and alt are both relocated up, so notching would not be needed.

http://www.hotrodlane.cc/lsasetups.jpg

All their stuff I have used is JUNK.

Just use the Vette bracket system for the engine drive. Its a simple swap with proven GM parts.

[cwylie]

I didnt have the best experience with street and performance either. The shipped me the wrong part. I paid for shipping both ways and they still took forever to refund my money.

[jimmythehand]

what about this setup? anyone had experience with it?


http://www.southernperformancesystem...r-kit-lsa.html

[dhutton]

Originally Posted by jimmythehand

what about this setup? anyone had experience with it?


http://www.southernperformancesystem...r-kit-lsa.html

It looks like it is based on the Kwikperformance setup. The supercharger is only on a 6 rib belt versus the stock 8 rib.

Don

[kwhizz]

Look at the belt wrap on the supercharger pulley on that Southern Performance set-up versus the GM set-up.........After being at Wegner and seeing how violently the tensioner pulley bounces around under load on the Dyno.........I would say that the SP setup would be good for Idling around town only........Like Rodger said.....It needs to be driven off the crankshaft pulley by itself........Just my $.02

Ken

[ironworks]

Just because some body sells some thing as the cats meow does mean it doesn't really suck. People sell lots of junk every day.