LS3 starter wiring?

[jlwdvm]

I a have been plugging away on the wiring on my 69 firebird track/street car with an LS3 and AAW Power Plus 20 wiring harness. I ordered a pigtail for my LS3 GM starter, but don't know which wire off of the fuse block to run to it. I'm used to older GM starters/wiring that has an "s" and "r" post.

[Vince@Meanstreets]

Originally Posted by jlwdvm

I a have been plugging away on the wiring on my 69 firebird track/street car with an LS3 and AAW Power Plus 20 wiring harness. I ordered a pigtail for my LS3 GM starter, but don't know which wire off of the fuse block to run to it. I'm used to older GM starters/wiring that has an "s" and "r" post.

just the purple 10g wire and your battery lead...run your main power to the battery or battery switch.

[jlwdvm]

See page 5 for a diagram of my wiring harness. Thanks.
http://www.americanautowire.com/PDFL...20IN%203.0.pdf

[Vince@Meanstreets]

Originally Posted by jlwdvm

See page 5 for a diagram of my wiring harness. Thanks.
http://www.americanautowire.com/PDFL...20IN%203.0.pdf

I see page 5. just use the purple wire to the s and the two bat+ leads to the big stud as shown.

http://www.americanautowire.com/shop/power-plus-20-kit


you should have this kit.
http://www.americanautowire.com/PDFL...0IN%2010.0.pdf

[jlwdvm]

I'll splice the GM pig tail onto the purple wire. I have the GM ignition with the Power Plus 20 kit. Thanks again.