...

Go Back   Lateral-g Forums > Technical Discussions > Interior and Electrical
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 09-26-2023, 09:35 PM
gnx7's Avatar
gnx7 gnx7 is offline
Senior Member
 
Join Date: Aug 2012
Location: Bay Area, CA
Posts: 666
Thanks: 4
Thanked 62 Times in 35 Posts
Default 1969 Chevelle: need all weatherstripping, seals etc

I have my car still in primer and don't plan to paint it any time soon so I can enjoy it without worries of scratches/dings/dents.... but I need to replace ALL of the window seals, felt, trunk/door seals etc.

What are 2-3 places you like to order from?

Need a headliner also... but want to have it redone in alcantara.... along with the dash (fiberglass 1970 Chevelle race style). I run a Holley digital dash so that seemed to be the one that worked best.
Attached Images
 
__________________
Project: 1969 Chevelle, alum 5.3, GTS76 turbo, Chiseled Perf A/W intercooler, Holley Dominator EFI, Davis TC, JRi coilovers, 14" brakes, T56 Magnum. CTS-V Recaro seats!
Coffey Fabrication Nashville, TN doing the fabwork! 800rwhp+/25mpg+/9's@150mph goal
https://lateral-g.net/forums/showthread.php4?t=52976

1993 Mazda FD RX-7, built LS7, T56 Magnum, Holley HP, Davis Tech TC, 8.8" 3.73 Cobra IRS diff, DSS axles, Ohlins coilovers, big brakes.
CCW 18x11 front 315/30/18's and 18x12.5 rear on 335/30/18 RA1's, 2850lbs
10.31@137mph 165mph Shift-Sector 1/2 mile speed
441ci AllPro headed motor and 200lb weigh reduction in the works....

Last edited by gnx7; 09-26-2023 at 09:38 PM.
Reply With Quote
  #2  
Old 10-16-2023, 06:49 PM
gnx7's Avatar
gnx7 gnx7 is offline
Senior Member
 
Join Date: Aug 2012
Location: Bay Area, CA
Posts: 666
Thanks: 4
Thanked 62 Times in 35 Posts
Default

nobody has any recommendations? What a great forum
__________________
Project: 1969 Chevelle, alum 5.3, GTS76 turbo, Chiseled Perf A/W intercooler, Holley Dominator EFI, Davis TC, JRi coilovers, 14" brakes, T56 Magnum. CTS-V Recaro seats!
Coffey Fabrication Nashville, TN doing the fabwork! 800rwhp+/25mpg+/9's@150mph goal
https://lateral-g.net/forums/showthread.php4?t=52976

1993 Mazda FD RX-7, built LS7, T56 Magnum, Holley HP, Davis Tech TC, 8.8" 3.73 Cobra IRS diff, DSS axles, Ohlins coilovers, big brakes.
CCW 18x11 front 315/30/18's and 18x12.5 rear on 335/30/18 RA1's, 2850lbs
10.31@137mph 165mph Shift-Sector 1/2 mile speed
441ci AllPro headed motor and 200lb weigh reduction in the works....
Reply With Quote
  #3  
Old 10-16-2023, 09:54 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,919
Thanks: 5,696
Thanked 1,612 Times in 726 Posts
Default

I've had very good luck with NPD. Several of our advertisers sell their parts.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
The Following User Says Thank You to camcojb For This Useful Post:
fleetus macmullitz (10-17-2023)
  #4  
Old 10-20-2023, 10:08 AM
RDuke RDuke is offline
Senior Member
 
Join Date: Sep 2007
Posts: 131
Thanks: 3
Thanked 92 Times in 32 Posts
Default

I've had luck with OER and Steele in the past. There's a lot of brands out there, but many of them are crap (slight molding issues, too thick, etc.)

My 2 cents/if I were in your shoes: I would give roadstershop a quick call and ask them what brand weatherstripping they like to use for their GM A body builds. They've been through a few and know which ones work vs. the crap and in my experience they are pretty good about helping the build community out.
Reply With Quote
The Following User Says Thank You to RDuke For This Useful Post:
camcojb (10-20-2023)
  #5  
Old 11-08-2023, 11:48 AM
gnx7's Avatar
gnx7 gnx7 is offline
Senior Member
 
Join Date: Aug 2012
Location: Bay Area, CA
Posts: 666
Thanks: 4
Thanked 62 Times in 35 Posts
Default

Appreciate the feedback! Black Friday sale ordering time....
Reply With Quote
  #6  
Old 11-26-2023, 04:57 PM
gnx7's Avatar
gnx7 gnx7 is offline
Senior Member
 
Join Date: Aug 2012
Location: Bay Area, CA
Posts: 666
Thanks: 4
Thanked 62 Times in 35 Posts
Default

Bought a set on OPGI for 25% off on Black Friday sale.
Reply With Quote
The Following User Says Thank You to gnx7 For This Useful Post:
camcojb (11-26-2023)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:28 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net