...

Go Back   Lateral-g Forums > Technical Discussions > Race Cars and Modern Pro-Street
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 12-26-2014, 11:22 PM
401Ambo's Avatar
401Ambo 401Ambo is offline
Junior Member
 
Join Date: Sep 2014
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
Default '69 AMX Pro-Street

This is my '69 AMX as it was back in 1990. Basically a shell, no driveline or interior, some damage to the hood and right fender along with some typical "Chicago surface rust".


The original plan was to move the rear springs inboard, put in a roll bar and a 390 with a TH400 for street & track. That plan got side tracked when along came a trick set of aluminum AMC heads (they flowed @ 390cfm at .600" lift). I figured I'd make some serious hp and decided the car needed a chassis for it. So in November of 1992 I got a frame kit from Chassisworks.
Now things went in the usual project car manner of stops & starts and a serious learning curve. After a while I came to the conclusion that I was building a car I did not want. The chassis had the car three inches off the ground, great for the track, pretty much useless on the street. Also, I didn’t like the look of the AMX that low. After helping friends with their race cars, I decided I would never do a track only car. I sold the trick heads, bought an Enderle manifold and had it converted for efi.
In 2002 I did a complete tear down, modified the front frame rails, and replaced the rears to raise the car up and add some rake to it. Of course, after I modified the front frame, I saw Chassiworks had the same height frame rails in their catalog. Lesson learned: mock up the car at the ride height you want and have the frame rails made for it! Don’t assume all they can do is what’s in the catalog. Duh!

AMX @2002 mock-up


January 2006 engine mounted


May 2011
Reply With Quote
  #2  
Old 12-27-2014, 09:21 AM
401Ambo's Avatar
401Ambo 401Ambo is offline
Junior Member
 
Join Date: Sep 2014
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
Default

March 2013, started stretching wheel openings






Reply With Quote
  #3  
Old 12-27-2014, 09:30 AM
401Ambo's Avatar
401Ambo 401Ambo is offline
Junior Member
 
Join Date: Sep 2014
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Mild stroker 390, ported iron heads, hydraulic roller cam




Engine w/Liberty prepped TKO 600


Reply With Quote
  #4  
Old 12-27-2014, 09:37 AM
401Ambo's Avatar
401Ambo 401Ambo is offline
Junior Member
 
Join Date: Sep 2014
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Modified header


Side pipe muffler mock-up


Exhaust system


AMX as of November
Reply With Quote
  #5  
Old 12-27-2014, 10:52 AM
Ketzer's Avatar
Ketzer Ketzer is offline
Lateral-g Supporting Member
 
Join Date: Feb 2008
Location: Eads, TN.
Posts: 1,449
Thanks: 336
Thanked 152 Times in 105 Posts
Default

I love Pro Street. Glad to see folks are still building them!
__________________
You remind me of the timing on a turbo engine...
Reply With Quote
  #6  
Old 12-27-2014, 11:14 AM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,919
Thanks: 5,714
Thanked 1,613 Times in 726 Posts
Default

I've always loved those cars.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #7  
Old 01-13-2015, 09:16 PM
Windsor GTO's Avatar
Windsor GTO Windsor GTO is offline
Senior Member
 
Join Date: Jan 2014
Posts: 112
Thanks: 0
Thanked 0 Times in 0 Posts
Default Amx

Any update? Always loved the 68-70 AMX. Friend of mine when I was growing up had 1 so did his Dad and brother.
Reply With Quote
  #8  
Old 01-14-2015, 09:28 PM
401Ambo's Avatar
401Ambo 401Ambo is offline
Junior Member
 
Join Date: Sep 2014
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Some progress, been working on the intake lately, made new fuel rails and a manifold for the MAP sensor, idle air control and intake air temp.


Reply With Quote
  #9  
Old 11-26-2015, 12:59 PM
401Ambo's Avatar
401Ambo 401Ambo is offline
Junior Member
 
Join Date: Sep 2014
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Time for an update: still not running, but getting close. Engine is plumbed & wired, interior coming along as well. Need to complete wiring in the trunk and bleed the hydraulics.

Also need a bigger garage. I thought that as I put the car together I’d gain some space. Seems something always manages to fill it.







Reply With Quote
  #10  
Old 11-26-2015, 03:04 PM
hardwork hardwork is offline
Junior Member
 
Join Date: Mar 2014
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default scarce amx

Great to see something besides chevy. Ive always had a soft spot for the underdogs with all the difficulties they present. You cant just open every speed catalogue there is and every thing you could ever want. For our "outside" the mainstream cars , very little is available. We have to adapt, invent and overcome barriers that chevys and fords don't even consider. Keep up the good work!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:52 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net