...

Go Back   Lateral-g Forums > Technical Discussions > Interior and Electrical
Reload this Page ECM trouble shoot
User Name
Password



Reply
Page 1 of 2 1 2
 
Thread Tools Display Modes
  #1  
Old 03-20-2016, 05:24 PM
vstol vstol is offline
Senior Member
  
Join Date: Jul 2005
Posts: 524
Thanks: 0
Thanked 13 Times in 10 Posts
Default ECM trouble shoot
Just got power to the car all is good except the ECM. The red mil light is on in the fuse panel relay, I do not have power to the fuel pump , the yellow mil light does not come on and I will check the codes this week. There is power to the ECM and all the fuses look fine, not sure about the relay, the harness is new and this is the first time power has been to it. I have the fuel pump wire from the ECM going to an on/off switch. Any ideas
https://lateral-g.net/forums/showthread.php4?t=44704
Reply With Quote
  #2  
Old 03-21-2016, 08:01 AM
Vega$69's Avatar
Vega$69 Vega$69 is offline
Lateral-g Supporting Member
  
Join Date: Aug 2012
Posts: 622
Thanks: 0
Thanked 2 Times in 2 Posts
Default
Why do you have the pump wire from the ECM going to a switch? It should go to the pump relay.

When you 1st turn the key on the ECM will pulse the fuel pump for a few seconds then stop. When the engine starts the ECM will control the fuel pump.
Reply With Quote
  #3  
Old 03-21-2016, 03:27 PM
Che70velle's Avatar
Che70velle Che70velle is offline
Senior Member
  
Join Date: Aug 2012
Location: Dawsonville Georgia
Posts: 2,220
Thanks: 612
Thanked 157 Times in 109 Posts
Default
Quote:
Originally Posted by Vega$69 View Post
Why do you have the pump wire from the ECM going to a switch? It should go to the pump relay.

When you 1st turn the key on the ECM will pulse the fuel pump for a few seconds then stop. When the engine starts the ECM will control the fuel pump.
Perhaps the switch is an anti-theft feature?
__________________
Scott
---------------------------------------------------------------
70 velle' on custom chassis w/custom RideTech coilovers, RED sleeved 434” with Mamo 265’s, F-body Magnum, 12 bolt 3:73, wilwood 6/4's, bla, bla, bla...build. thread https://lateral-g.net/forums/showthread.php4?t=39631
New 434” engine build here https://ls1tech.com/forums/generatio...ved-block.html

Thanks Dad!!

My Chevelle is old school... It has a belt driven power steering pump.
They're 17's, but I keep em clean!
Reply With Quote
  #4  
Old 03-21-2016, 06:11 PM
vstol vstol is offline
Senior Member
  
Join Date: Jul 2005
Posts: 524
Thanks: 0
Thanked 13 Times in 10 Posts
Default
Here is the update. I have the Holley electric fuel pump. The directions for the ECM said to take the power supply wire for the fuel pump and attach it directly to the power wire on the pump. I have it going to a 40 amp switch. Right now there is no power going to the fuel pump wire. The little red light is on in the fuse relay panel but all the fuses are good. When I pull the ignition relay out the red light goes away and the MAF shutters for a second. When I try other relay's the same effect occurs. I have zero codes.

I have run power to the pump and it works. Thanks


https://lateral-g.net/forums/showthread.php4?t=44704
Reply With Quote
  #5  
Old 03-22-2016, 09:30 AM
vstol vstol is offline
Senior Member
  
Join Date: Jul 2005
Posts: 524
Thanks: 0
Thanked 13 Times in 10 Posts
Default
Looking for a life raft here, thanks. Its got to be simple
Reply With Quote
  #6  
Old 03-22-2016, 12:42 PM
dhutton dhutton is offline
Senior Member
  
Join Date: Nov 2006
Location: Mountain Springs, Texas
Posts: 1,857
Thanks: 992
Thanked 451 Times in 249 Posts
Default
Quote:
Originally Posted by vstol View Post
Looking for a life raft here, thanks. Its got to be simple
Post a schematic/diagram of what you have connected. Hard to follow otherwise.

Don
Reply With Quote
  #7  
Old 03-22-2016, 02:07 PM
Vega$69's Avatar
Vega$69 Vega$69 is offline
Lateral-g Supporting Member
  
Join Date: Aug 2012
Posts: 622
Thanks: 0
Thanked 2 Times in 2 Posts
Default
Quote:
Originally Posted by vstol View Post
Looking for a life raft here, thanks. Its got to be simple
Key engine not running there will not be 12V to the fuel pump
Reply With Quote
  #8  
Old 03-22-2016, 02:59 PM
vstol vstol is offline
Senior Member
  
Join Date: Jul 2005
Posts: 524
Thanks: 0
Thanked 13 Times in 10 Posts
Default
Quote:
Originally Posted by Vega$69 View Post
Key engine not running there will not be 12V to the fuel pump
So there will not be 12 volts there unless its running? I would think there would be a short 2 sec burst on the initial turn of the key?
Reply With Quote
  #9  
Old 03-22-2016, 03:21 PM
Vega$69's Avatar
Vega$69 Vega$69 is offline
Lateral-g Supporting Member
  
Join Date: Aug 2012
Posts: 622
Thanks: 0
Thanked 2 Times in 2 Posts
Default
Quote:
Originally Posted by vstol View Post
So there will not be 12 volts there unless its running? I would think there would be a short 2 sec burst on the initial turn of the key?
yes short burst when key is 1st turned on
Reply With Quote
  #10  
Old 03-22-2016, 03:26 PM
vstol vstol is offline
Senior Member
  
Join Date: Jul 2005
Posts: 524
Thanks: 0
Thanked 13 Times in 10 Posts
Default
thanks I will check tonight
Reply With Quote
Reply
Page 1 of 2 1 2

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:52 PM.
Contact Us - Lateral-g.net - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net