...

Go Back   Lateral-g Forums > Classifieds > Parts for Sale
User Name
Password



Closed Thread
 
Thread Tools Display Modes
  #1  
Old 07-10-2022, 03:59 PM
gnx7's Avatar
gnx7 gnx7 is offline
Senior Member
 
Join Date: Aug 2012
Location: Bay Area, CA
Posts: 658
Thanks: 4
Thanked 57 Times in 33 Posts
Default FS: C6 Z06 calipers with 2 piece rotors

Item Location (City/State): San Ramon, CA

Price: $650

Description: I purchased these for a project and went with larger Wilwood 14.25" version. The rotors are DBA and 1 new and 1 used with lots of life left (I believe near new as there is no ridge on it). The hat should be removed and powdercoated black to match the other one. 2 piece rotors save over 10lbs per side compared to a stock 1 piece rotor and are $450 EACH new.

https://www.tirerack.com/brakes/brak...!&gclsrc=aw.ds


$650 plus shipping for both DBA rotors (calipers are sold). email me for pics: [email protected]
__________________
Project: 1969 Chevelle, alum 5.3, GTS76 turbo, Chiseled Perf A/W intercooler, Holley Dominator EFI, Davis TC, JRi coilovers, 14" brakes, T56 Magnum. CTS-V Recaro seats!
Coffey Fabrication Nashville, TN doing the fabwork! 800rwhp+/25mpg+/9'[email protected] goal
https://lateral-g.net/forums/showthread.php4?t=52976

1993 Mazda FD RX-7, built LS7, T56 Magnum, Holley HP, Davis Tech TC, 8.8" 3.73 Cobra IRS diff, DSS axles, Ohlins coilovers, big brakes.
CCW 18x11 front 315/30/18's and 18x12.5 rear on 335/30/18 RA1's, 2850lbs
[email protected] 165mph Shift-Sector 1/2 mile speed
441ci AllPro headed motor and 200lb weigh reduction in the works....

Last edited by gnx7; 11-12-2022 at 01:02 PM.
  #2  
Old 08-14-2022, 02:39 PM
gnx7's Avatar
gnx7 gnx7 is offline
Senior Member
 
Join Date: Aug 2012
Location: Bay Area, CA
Posts: 658
Thanks: 4
Thanked 57 Times in 33 Posts
Default

Some pics.... the calipers are sold. I only have the rotors now.
Attached Images
     
__________________
Project: 1969 Chevelle, alum 5.3, GTS76 turbo, Chiseled Perf A/W intercooler, Holley Dominator EFI, Davis TC, JRi coilovers, 14" brakes, T56 Magnum. CTS-V Recaro seats!
Coffey Fabrication Nashville, TN doing the fabwork! 800rwhp+/25mpg+/9'[email protected] goal
https://lateral-g.net/forums/showthread.php4?t=52976

1993 Mazda FD RX-7, built LS7, T56 Magnum, Holley HP, Davis Tech TC, 8.8" 3.73 Cobra IRS diff, DSS axles, Ohlins coilovers, big brakes.
CCW 18x11 front 315/30/18's and 18x12.5 rear on 335/30/18 RA1's, 2850lbs
[email protected] 165mph Shift-Sector 1/2 mile speed
441ci AllPro headed motor and 200lb weigh reduction in the works....

Last edited by gnx7; 11-12-2022 at 01:04 PM.
  #3  
Old 11-12-2022, 05:24 PM
gnx7's Avatar
gnx7 gnx7 is offline
Senior Member
 
Join Date: Aug 2012
Location: Bay Area, CA
Posts: 658
Thanks: 4
Thanked 57 Times in 33 Posts
Default

Rotors left.... save around 10lbs per side over stock 1 piece.
__________________
Project: 1969 Chevelle, alum 5.3, GTS76 turbo, Chiseled Perf A/W intercooler, Holley Dominator EFI, Davis TC, JRi coilovers, 14" brakes, T56 Magnum. CTS-V Recaro seats!
Coffey Fabrication Nashville, TN doing the fabwork! 800rwhp+/25mpg+/9'[email protected] goal
https://lateral-g.net/forums/showthread.php4?t=52976

1993 Mazda FD RX-7, built LS7, T56 Magnum, Holley HP, Davis Tech TC, 8.8" 3.73 Cobra IRS diff, DSS axles, Ohlins coilovers, big brakes.
CCW 18x11 front 315/30/18's and 18x12.5 rear on 335/30/18 RA1's, 2850lbs
[email protected] 165mph Shift-Sector 1/2 mile speed
441ci AllPro headed motor and 200lb weigh reduction in the works....
  #4  
Old 12-05-2022, 01:44 PM
gnx7's Avatar
gnx7 gnx7 is offline
Senior Member
 
Join Date: Aug 2012
Location: Bay Area, CA
Posts: 658
Thanks: 4
Thanked 57 Times in 33 Posts
Default

Upon further inspection these rotors measure both 32mm thick which is spec'd as new (1.26" or 32mm). One was 32.1x mm and the other was 32.2x (probably the difference was my crappy caliper) differences of around .04 to .07mm
So they are basically both new. One is the gold version ring and the other is black. Cheapest solution is powdercoat the gold one black and save over $500.

This version is actually $555 new EACH on Summit.

https://www.summitracing.com/parts/dba-52992blkxs
  #5  
Old 12-16-2022, 11:50 AM
gnx7's Avatar
gnx7 gnx7 is offline
Senior Member
 
Join Date: Aug 2012
Location: Bay Area, CA
Posts: 658
Thanks: 4
Thanked 57 Times in 33 Posts
Default

Sold.... going to Niagara Falls, NY!
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:50 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.
Copyright Lateral-g.net