I have a 69 Camaro that I am about to swap a 416 LS3 in... I was curious as to whether Kooks 2" longtube headers (or any brand I suppose) would fit with the stock subframe, etc?
I was planning on getting 2" but heard from someone on LS1Tech that the first gen's my have complications fitting the 2" and would have to go with 1 7/8".
Anyone with experience with the 2"??? Thanks in advance.
__________________
'69 Camaro
416ci / T56 / 9"
Turbo in the works...
if a 1/16 of an inch makes all the differance then i would say the 1 7/8 don't fit either.
you probably have to try them.
it may also depend on what steering box your using
We have a vendor coming on board that may have what you're looking for. I cannot share anything quite yet, but I sent him an email and will let you know what he says. His strength is getting large tubes in tight areas with LS headers.
Well, I have the DSE subframe with an LS3 418 and Harrop Supercharger. I bought Lemons Headers and they are 2". According to Lemons header website, it says that you can get 2" with stock subframe. http://www.lemonsheaders.com/products/lspt-300.htm
My kooks 1 7/8" headers fit Perfectly in my stock sub-frame, and can support up to 800hp. Don't know why you want 2" primaries unless your building something totaly insane.
Don't have a good pic, but the primaries hang below the subframe by about a 1/4" and they clear my DSE steering box with NO issues (using Dirty Dingo sliders). Quality is top notch!
100% recommend Kooks!
__________________
'69 Camaro Coupe, Full Ridetech stage 3 suspension, moser wavetrac 12bolt, Forgelines, Ls3 Heads/Cam,T56 Magnum. Built by me and tuned by Ed!
'69 'Vert Camaro: DSE Sub-Frame, DSE Mini-Tub, DSE Four-Link w/9inch. LME LS7 427, T56. Tuned by Ed Hutchings, :SOLD!
I think your only real issue is steering box clearance. I would talk to Kooks and see what they say, maybe they can do a stepped 1 7/8 to 2" for you to get around it.
Looking forward to the build!
__________________
'69 Camaro Coupe, Full Ridetech stage 3 suspension, moser wavetrac 12bolt, Forgelines, Ls3 Heads/Cam,T56 Magnum. Built by me and tuned by Ed!
'69 'Vert Camaro: DSE Sub-Frame, DSE Mini-Tub, DSE Four-Link w/9inch. LME LS7 427, T56. Tuned by Ed Hutchings, :SOLD!
Took a pic for ya, once again, this is a stock sub with 1 7/8" Kooks and a DSE steering box...about a half inch clearance and I was able to slide the engine full forward and back with the Dirty Dingo sliders with no issues (maybe 2.5").
__________________
'69 Camaro Coupe, Full Ridetech stage 3 suspension, moser wavetrac 12bolt, Forgelines, Ls3 Heads/Cam,T56 Magnum. Built by me and tuned by Ed!
'69 'Vert Camaro: DSE Sub-Frame, DSE Mini-Tub, DSE Four-Link w/9inch. LME LS7 427, T56. Tuned by Ed Hutchings, :SOLD!