WOW! Not that many squares on here. I know there are more of you that come on here so lets get some pics up.
Here's my 77 Cheyenne. It has been through a few transitions with the help of some good friends including my buddy Tony from RideTech.
The body is stock, but everything under the hood and suspension has been updated. I am running a GM Ramjet 350 with a built 700r4. This was installed by Roger and Keith at RPL Customs back when they were with another shop.The article on that install is here
"77 Cheyenne meets Ramjet 350 by N2TRUX"
The RPL crew recently did a complete RideTech update which included StrongArms, MuscleBars, up front and the AirBAR system in the rear.The complete build of that system was documented in my online article "
DO NOT OPEN- Air Ride Technologies inside"This article was taken to print in the July issue of StreetTrucks. Thanks to Travis!
Currently I am adding yet another update to the system. You can read about the RideTech e3 install in my article here
"e3 LevelPro + Big Red x4 ≈ 77 Air Square"