I have looked into the Borla but they only have an offset in and out, not sure I can make that work but its worth a shot.
I was really trying to stick with something that was not packing based but also need to get it all buttoned up too.
Back from out of town but have a jacked up finger now so not much is going to happen. Having a tough time even updating the build thread :wtf:
Received one more wheel on Tuesday night and it happened to be a front so I got the wheels all test fit on the car. Like a glove. It was a ton of work to get things all measured up but totally happy with that choice in the end.
For tires I was dead set on Rivals but upon further reading of them overheating on track days and getting greasy when hot I decided to go with the RE71R, Tires are at 503 awaiting the last wheels to show up.
Hope they arrive today as per my fedex updates.
Been trying to figure out a catch can with no luck. so I am tackling building one on my own that will be perfect shape and size for my needs, also no rad cap.
Still learning on the tig stuff, small cylindrical pieces are very hard still with filler, no problem on fusion like the outside weld.
This will tuck in behind the radiator support at the passenger headlight area and have a drain to ground if needed.
Sean