I have working on a few thing's other than Car's. A few month's ago started build my own 4X4 CNC Plasma Table.The gantry kit came Precision plasma.com,and the control came from CandCNC.com.It took me about 2 months to get all put togather and wired up.And bought a new Hypertheme powermax 85 to cut with.The heaviest material I have cut so far is 1/4".I cut all the C-6 weld in clip chassis parts out with it.The hard part for me has been learning the PC part of it.I also built a roll around stand for my Mitler bros punch and die & louver press. I am hoping to be able to adapted the press to work with my Holohan tru-ovals punch's.
I also up graded my Mitler Bros bead roller to a 36" w/ind motor.It work's really well on 16 ga.I had a 24" unit w/std. motor,gave it to a good friend.
Very nice Scott, I love when I get new tools for the shop! Now that I have my new Miller tig my next is a bead roll or tubing bender not sure which will come first?
Very nice Scott, I love when I get new tools for the shop! Now that I have my new Miller tig my next is a bead roll or tubing bender not sure which will come first?
I would start with the one you think you might use the most and then work the other direction.
My New Jancy Radius Master showed up today.It has 5 differant spindle size's for shaping part's.It need's a heavier base.Maybe something around 20"square x1/2" plate.Ordered it from Trick Tool's thurs. here today.Cool!!!!!!