...

Go Back   Lateral-g Forums > Technical Discussions > Brakes
User Name
Password



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-26-2022, 11:51 AM
mfain mfain is offline
Senior Member
 
Join Date: May 2009
Posts: 450
Thanks: 68
Thanked 104 Times in 49 Posts
Default Tilton Pivoting Master Cylinders

Just completed the install of the Tilton 900-series brake pedal assembly and 78-series, pivoting MCs. Since the MCs pivot in a front bearing (in order to keep the actuator shaft and cylinder in perfect alignment), the feed and discharge lines must be flexible. Brown and Miller (BMRS) fabricated the reservoir-to-MC and MC-to-bulkhead lines. Hard lines are used from the bulkhead fitting to the calipers.

Name:  Brake cylinders 2.jpg
Views: 0
Size:  79.8 KB

Name:  Brake cylinders 1.jpg
Views: 0
Size:  94.3 KB

Name:  Brake cylinders 3.jpg
Views: 0
Size:  79.8 KB
Reply With Quote
The Following 3 Users Say Thank You to mfain For This Useful Post:
68454RS (03-09-2024), camcojb (08-26-2022), colorado80439 (10-13-2022)
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net