A little update...

[GHOSTDANCER]

Looks Great

[Rybar]

Lookin good Rob, that intake is sick. I don't wanna know what that costs...

[Sales@Dutchboys]

WOW! that intake is frickin sweet!


Paul

[rwhite692]

Originally Posted by XcYZ

That's awesome, Rob. That intake is going to look killer on your motor.

The rotisserie... why I didn't buy or fabricate one for my project is beyond me.

What's the next step?

Thanks Scott...yes that rotisserie has paid for itself big time, in terms of saving my back...The next step will be to install the rearend housing (you might remember it's a DSE fabricated 9inch, the Qlink brackets are already on it) and locate/install the upper shock mounts...then send out the housing for powdercoat and while that's going on I will start in on the roll bar/partial cage, then prime the bottom of the car / apply bedliner material...and still have to make up my mind on the front subframe...so, there's still tons of stuff to do!

Paul, Ryan thanks for the kind words...The intake was a killer deal that I could not pass up; my project budget wouldn't normally allow for a custom sheetmetal intake, had it not come along, I was going to get my existing (cast) Dart intake modified for injector bungs, etc.

[awr68]

Originally Posted by rwhite692

...The intake was a killer deal that I could not pass up; my project budget wouldn't normally allow for a custom sheetmetal intake, had it not come along, I was going to get my existing (cast) Dart intake modified for injector bungs, etc.

Good things happen to good people!!

[G-Stock22]

nice!

[rwhite692]

Well I figured since it has been a long long while I'd post a little update on some things I've gotten done on the car here and there and I know everyone likes pics even though you have all seen this stuff before.

Put the clip in and aligned it for mockup, etc...still need to fabricate connections between the DSE subframe connectors and the clip...My Nephew Dennis was in town for a few days, he works for RWI / Steve Wallace Nationwide series team in NC and he is a good chassis setup guy, so having him around was a big help and we had ourselves a good ole time. Next have to set the motor in for mockup of the turbo and intercooler plumbing and all that, and locate the trans xmember....have to order up a steering column too.

It was hotter'n blazes on Monday when we wheeled this outside to take some snaps.



Couple of belly shots






Before anyone gets all worked up....that is black seam sealer in the tub joints, not a gap













Time to roll this thing back inside and go jump in the pool

[Rybar]

Car is looking great, thanks for the update pics!

[class67]

So you do still have interest in that thing...lol

I drove by your house one day last week, the door was open and I saw boxes all piled up around the car, good to see you working on it.

[rwhite692]

Hey Steve you should have stopped in for a beer we could have used some help moving all those boxes! I need to get moved out of the house garage and into the new garage, there's so much more work to do on that, and only so much time and money to go 'round...