...

Go Back   Lateral-g Forums > Technical Discussions > LSX Conversions
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 08-20-2020, 11:37 PM
fmf816 fmf816 is offline
Junior Member
 
Join Date: Sep 2008
Posts: 3
Thanks: 1
Thanked 0 Times in 0 Posts
Default Ls3/525

I’m looking so do a ls swap in my 72 camaro. Looking at the LS3/525hp with a 6speed. The connect and cruse or erod. Does anybody have this setup? Curious of likes or dislikes. Or other suggestions? TIA
Reply With Quote
  #2  
Old 08-20-2020, 11:47 PM
andrewb70's Avatar
andrewb70 andrewb70 is offline
Lateral-g Supporting Vendor
 
Join Date: Jul 2005
Posts: 911
Thanks: 248
Thanked 591 Times in 242 Posts
Default

Quote:
Originally Posted by fmf816 View Post
I’m looking so do a ls swap in my 72 camaro. Looking at the LS3/525hp with a 6speed. The connect and cruse or erod. Does anybody have this setup? Curious of likes or dislikes. Or other suggestions? TIA
I can tell you that the ASA cam that GM uses in the LS3/525 is not ideal. It doesn't idle well, is finicky to tune, and leaves power on the table. The only reason GM uses it is so they can use cheap, stock valve springs.

A buddy of mine went with the base LS3/430, got that BTR Stage 2 LS3 cam, valve springs, and pushrods. He was money ahead and his combination makes great power and drives great.

I like the Holley EFI options vs. the stock GM stuff because it is more suited for hot rods. The Terminator X Max would work great for this combination. I can offer assistance with wiring, tuning, and parts selection.

Andrew
__________________
Instagram @dr__efi
I offer remote Holley EFI tuning.
I deliver what EFI promises.
Please get in touch if I can be of service.
My YouTube Channel
Reply With Quote
The Following 3 Users Say Thank You to andrewb70 For This Useful Post:
ADY (08-21-2020), fmf816 (08-21-2020), WILWAXU (08-21-2020)
  #3  
Old 08-22-2020, 01:39 PM
PTAddict PTAddict is offline
Senior Member
 
Join Date: May 2005
Posts: 290
Thanks: 12
Thanked 24 Times in 13 Posts
Default

Having tuned a few of them, I'd also stay away from the LS3/480. The gap in power over the 430 is less than the ratings suggest. As Andrew says, get a 430 and put in an aftermarket cam suited to your preferences.

Although the Holley setup is nice, the factory style crate motor ECU can also work very well if you have a tuner familiar with it. The out-of-the box crate motor tune is usually off though (too rich) so tuning is almost a must.
__________________
Latest car: https://lateral-g.net/members/borduin/
EFI Tuner for: http://www.modernclassicsauto.com
Reply With Quote
  #4  
Old 08-22-2020, 03:20 PM
Musclerodz's Avatar
Musclerodz Musclerodz is offline
Senior Member
 
Join Date: Nov 2004
Location: washington, ok
Posts: 4,286
Thanks: 22
Thanked 164 Times in 95 Posts
Default

Quote:
Originally Posted by andrewb70 View Post
I can tell you that the ASA cam that GM uses in the LS3/525 is not ideal. It doesn't idle well, is finicky to tune, and leaves power on the table. The only reason GM uses it is so they can use cheap, stock valve springs.

A buddy of mine went with the base LS3/430, got that BTR Stage 2 LS3 cam, valve springs, and pushrods. He was money ahead and his combination makes great power and drives great.

I like the Holley EFI options vs. the stock GM stuff because it is more suited for hot rods. The Terminator X Max would work great for this combination. I can offer assistance with wiring, tuning, and parts selection.

Andrew
cam doesn't make any vacuum either. 480hp pulls harder
__________________
Mike Redpath
Musclerodz & Customz
facebook page
Reply With Quote
  #5  
Old 08-22-2020, 03:53 PM
dhutton dhutton is offline
Senior Member
 
Join Date: Nov 2006
Location: Mountain Springs, Texas
Posts: 1,894
Thanks: 1,107
Thanked 487 Times in 268 Posts
Default

Quote:
Originally Posted by PTAddict View Post
Having tuned a few of them, I'd also stay away from the LS3/480. The gap in power over the 430 is less than the ratings suggest. As Andrew says, get a 430 and put in an aftermarket cam suited to your preferences.

Although the Holley setup is nice, the factory style crate motor ECU can also work very well if you have a tuner familiar with it. The out-of-the box crate motor tune is usually off though (too rich) so tuning is almost a must.
You are the first one I have seen complain about the 480. Most seem to think it is a good package.

Don
Reply With Quote
  #6  
Old 08-22-2020, 03:58 PM
dhutton dhutton is offline
Senior Member
 
Join Date: Nov 2006
Location: Mountain Springs, Texas
Posts: 1,894
Thanks: 1,107
Thanked 487 Times in 268 Posts
Default

Check the reviews on Summit before choosing a specific BTR cam. I just had an issue with one of their mild cams producing such low vacuum that the power brakes wouldn’t work properly. Major PITA....

Don
Reply With Quote
  #7  
Old 08-22-2020, 04:01 PM
XLexusTech XLexusTech is offline
Senior Member
 
Join Date: Jun 2007
Posts: 1,331
Thanks: 85
Thanked 109 Times in 63 Posts
Default

I have the ls3 480.. if i were to be at ground zero .. I would do an LSA..

to the OP..

https://www.facebook.com/BrianTooley...7370347471143/

Last edited by XLexusTech; 08-22-2020 at 04:05 PM.
Reply With Quote
  #8  
Old 08-22-2020, 05:37 PM
PTAddict PTAddict is offline
Senior Member
 
Join Date: May 2005
Posts: 290
Thanks: 12
Thanked 24 Times in 13 Posts
Default

Quote:
Originally Posted by dhutton View Post
You are the first one I have seen complain about the 480. Most seem to think it is a good package.

Don
There's nothing wrong with it necessarily, it has good drivability and tunes pretty easily, it just doesn't seem to make the power you'd want from a cammed LS3. A typical mild aftermarket cammed LS3 will put down 450-465 rwhp on our dyno with a fat torque curve, good idle and drivability. I've never seen a 480 get anywhere close to that, to put it mildly.

I recently tuned two LS3s in manual trans C5/C6 vettes, one 430 and one 480, both with headers, exhaust, CAI. The 430 car beat the 480 car almost everywhere in the curve. It's impossible to control for all the variables in such a comparison, of course, but still you'd expect to see a significant advantage for the 480.
__________________
Latest car: https://lateral-g.net/members/borduin/
EFI Tuner for: http://www.modernclassicsauto.com
Reply With Quote
  #9  
Old 08-22-2020, 06:01 PM
PTAddict PTAddict is offline
Senior Member
 
Join Date: May 2005
Posts: 290
Thanks: 12
Thanked 24 Times in 13 Posts
Default

One cam I've personally had great success with is the Mast LS3 HO:

https://www.mastmotorsports.com/coll...s/ls3-ho-cam-1

This made about 455 RWHP and 430 RWTQ in my 71 Camaro through a 12 bolt rear. Idled and drove like a *****cat.
__________________
Latest car: https://lateral-g.net/members/borduin/
EFI Tuner for: http://www.modernclassicsauto.com
Reply With Quote
  #10  
Old 08-23-2020, 08:02 PM
randy randy is offline
Senior Member
 
Join Date: Jan 2011
Posts: 1,041
Thanks: 3
Thanked 68 Times in 43 Posts
Default

I started with the ls3 480. Nothing wrong with it and it made 420rwhp. I enjoyed the cam for about a year and wanted more rpms and power. I bought a Texas speed stage 2 Na cam kit, springs, push rods, trunion upgrade, with 111lsa and made 479rwhp. Car pulled great and I loved it. I now have a heartbeat blower on top of it and left the stage 2 Na cam in there. Making 754rwhp now

Don’t go with the ls3 430. Go with the 480 version and enjoy it for awhile. Then upgrade with a cam kit. I’m also using the gmpp controller and love how simple it is.
Reply With Quote
The Following User Says Thank You to randy For This Useful Post:
Atomic69 (02-22-2021)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:15 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net