Go Back   Lateral-g Forums > Technical Discussions > How To's, Tips, and Tricks
User Name

Thread Tools Display Modes
Old 03-03-2021, 10:52 AM
572Camaro's Avatar
572Camaro 572Camaro is offline
Senior Member
Join Date: Nov 2016
Location: Central Missouri
Posts: 244
Thanks: 239
Thanked 104 Times in 66 Posts
Default EXHAUST CUTOUTS one-touch

I have always wanted exhaust cutouts on my 68 Camaro. Sporting a 572 tall deck big block, I thought it would be cool.

Here’s the problem: I want the one-touch button like Kindiggit does on their builds, but they won’t sell the parts or design. Kindiggit sells cutouts with a rocker switch which you have to hold during opening and closing which can lead to motor failure over time.

Here’s the solution:
1. Buy a momentary button that has at least 4 amp capacity.
I went with Billet Automotive Buttons out of Australia because it’s backlit and custom laser etched. See pic and schematic drawing. Works perfectly.

2. Go to TimersShop.com. and buy their exhaust cutout controller.
It is an excellent controller and is tricky to wire the terminals.
TIP: solder tin 18awg wire about 5/16” long and stab it deep through the opening. Anything larger awg won’t stay.
See pic and schematic.
Note in pic that we used weatherpac connectors because we wanted to upgrade wiring beyond controller to16awg with sxl insulation.

3. Install the cutouts in exhaust. I used Kindiggit cutouts with custom inlet piping (no extra charge!). See pic.

If you are as committed as I am regarding open headers at the “touch” of a button.., please reply
Attached Images
Reply With Quote
The Following 5 Users Say Thank You to 572Camaro For This Useful Post:
ADY (03-03-2021), camcojb (03-03-2021), cpd004 (03-04-2021), dhutton (03-03-2021), RDuke (03-04-2021)
Old 03-04-2021, 12:58 PM
RDuke RDuke is offline
Senior Member
Join Date: Sep 2007
Posts: 111
Thanks: 2
Thanked 45 Times in 19 Posts

Very cool, thank you. I book marked the site and will likely do the same. I also like some of the other products they offer.
Reply With Quote
The Following User Says Thank You to RDuke For This Useful Post:
572Camaro (03-04-2021)

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 02:16 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.
Copyright Lateral-g.net