...

Go Back   Lateral-g Forums > Technical Discussions > How To's, Tips, and Tricks
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 11-18-2019, 08:16 PM
firebob's Avatar
firebob firebob is offline
Member
 
Join Date: Feb 2012
Posts: 27
Thanks: 0
Thanked 2 Times in 2 Posts
Default Replacing door skins

Any tips to R&R door skins? I think there is a crimper made for the edges. Probably makes thing a bit easier I would think.
__________________
Robert

https://youtu.be/eaWBd3M9MN4
Reply With Quote
  #2  
Old 02-28-2020, 12:50 PM
nickcornilsen's Avatar
nickcornilsen nickcornilsen is offline
Member
 
Join Date: Oct 2011
Location: Portland, OR
Posts: 66
Thanks: 0
Thanked 5 Times in 4 Posts
Default

To remove the skins, use an angle grinder and grind along the edge of the door. you'll get through the hemmed edge very quick. Then dress the spotwelds, etc.

Sandblast the lip and inside the door, apply a good epoxy primer.

Don't waste your money on a crimper - get a good door skin hammer and dolly, and do it by hand. you want to make several passes to slowly fold the edge over.

Once you've folded the edge over, put the door on the car,make sure it lines up. Then spot weld to lock the position in.

If you're doing adhesives... get a slow one, and work quick!

-Nick
__________________
Wanted - F-Body LS1 oilpan/pickup/baffle
Reply With Quote
The Following User Says Thank You to nickcornilsen For This Useful Post:
camcojb (02-28-2020)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:27 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright Lateral-g.net