...

Go Back   Lateral-g Forums > Technical Discussions > Shop & Equipment
User Name
Password



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-16-2018, 12:39 PM
SSLance's Avatar
SSLance SSLance is offline
Senior Member
 
Join Date: Oct 2013
Location: Peoria, AZ
Posts: 2,668
Thanks: 72
Thanked 337 Times in 211 Posts
Default MIG welding tip question

I looked for a bit to find a thread on MIG welding tips with no success so I'm starting one.

I'm having an issue with one kind of weld and I'm hoping someone may have a tip or trick to help me out.

One an overhead 90 degree joint weld, I can't seem to get the puddle to start or stay on the overhead part. I've only tacked it so far and struggled with that..so wanted to pick the experts brains before burning it in for good.

Here is the piece...



Where the stand welds to the bottom of the frame is where I'm having the issue, I can't seem to get a puddle to start on the frame before it falls on either the torch tip, top of my head, or my arms...

I'm using a Miller 211 on 120v, 024 wire, and these settings with worked well on the same stock flat on a table. Only difference is the frame itself with is about 1/8" steel I believe.



This is what my bead looked like on the table...



Appreciate any tips...probable going to fire the welder back up tomorrow and try to finish burning everything in.
__________________
Lance
1985 Monte Carlo SS Street Car
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:59 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net