Totally agree with Marty this colour is absolutely fantastic .... I am praying that you guys are putting on a set of bad ass black wheels to offset that awesome green.
Now thats just me, im sure others have their own opinion on wheel selection.
Cheers
Steve
Customer wants some nice Crager style to go with all his factory chrome.
Will look great in the end!
__________________
-Cole Quintin
Quintin Brothers Auto & Performance
Last edited by QuintinBrothers; 01-09-2019 at 08:25 AM.
The upper and lower control arms were first dis-assembled.. then fully restored using new bushings and lower control arm stiffening plates.. We also cleaned up the K member and rear end housing and gave everything a nice spray of gloss black to accent all the brand new parts and make sure everything is protected, and nice looking for a long time.
We opted to run the complete Hotchkis suspension setup on this car, while retaining the factory suspension geometry.
We are running the Hotchkis strut rods, leaf springs, front and rear sway bars, and shocks all the way around.
PST supplied the brand new 2" drop spindles, torsion bars, and front end bushings.
On the fuel system side of things.. We are running a stock brand new tank, straps and sending unit.
For steering.. We needed to get rid of the factory sloppy steering.. so we went with a upgraded fast ratio Borgeson box with arms.. Connected to a fully rebuilt factory steering column.
After a lot of work.. The engine is completely built and set in the car. The engine is a stock stroke 440, with aluminum heads, intake, good cam and a few other little goodies to make some decent power for the owner's all around needs.
We painted the engine all 100% hemi orange to keep with some original look.
For stopping power, We got all the inline tube brake lines mounted up where everything should be, as well as a polished Wilwood master cylinder and Prop. Valve!
Coming up next is a very important step to a build like this.. Dynamat!
We love this stuff ever since using it on our Camaro build, and don't think we could build another car without it.
On this one, We full layed down Dynamat inside the doors, the full firewall, floor, inside of quarters, wheel houses and package tray.. this thing will be super quiet inside!