...

Go Back   Lateral-g Forums > Introductions > Member/Project/Vehicle Introductions
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 04-03-2020, 09:20 PM
Scatterbrained Scatterbrained is offline
Junior Member
 
Join Date: Dec 2009
Location: Joliet, IL
Posts: 8
Thanks: 0
Thanked 2 Times in 1 Post
Default New project, 1970 Mustang

Hey all - been watching the forum for a while and finally rescued a 1970 Mustang that needs just about everything upgraded! Originality is long gone, so the only restraints are time and budget. I'm hoping to turn this into an all around cruiser that won't embarrass itself on the drag strip or auto cross track.

First stop - brakes (see what I did there?)

The car currently has 4 wheel manual drums, and that's just not gonna work. For those that have upgraded, what would you do if you could do it over again?

Looking forward to being part of the community, albeit with more questions than answers probably!

Scatter'd
Attached Images
 
Reply With Quote
The Following 2 Users Say Thank You to Scatterbrained For This Useful Post:
camcojb (04-04-2020), WILWAXU (04-07-2020)
  #2  
Old 04-03-2020, 09:43 PM
Beechy's Avatar
Beechy Beechy is offline
Senior Member
 
Join Date: Nov 2014
Location: Melbourne, Australia
Posts: 258
Thanks: 106
Thanked 95 Times in 68 Posts
Default

Scatter'd,

Welcome to the group!

If you've resolved suspension and rear axle choices, it seems the overwhelming majority of brake projects have been resolved with great advice from Tobin at Kore3....he's a sponsor (clickable from the column at left of the page).

For the life of me, I can't think of a pun to match yours right now....sorry.
__________________
Jim Grant
Melbourne, Australia
(Dual citizen)
Reply With Quote
  #3  
Old 04-05-2020, 12:17 PM
572Camaro's Avatar
572Camaro 572Camaro is offline
Senior Member
 
Join Date: Nov 2016
Location: Central Missouri
Posts: 269
Thanks: 253
Thanked 129 Times in 76 Posts
Default

Scatterbrained,

1. Welcome to Lat-G!

2. Although I suffer from pretty serious OCD, (Obsessive Camaro Disorder),
See, I have a sense of humor too. Lol..,
I love your new project.

3. What are you thinking.., regarding engine, tranny, and axle package?
Any thoughts yet?

4. How is the body of your Mustang? RUST, dents, etc.

5. Timeline? (only took me 10.5 years to build my red car so I don't judge).

6. How can we on Lat-G help you now? We care.
Reply With Quote
  #4  
Old 04-07-2020, 09:45 PM
Scatterbrained Scatterbrained is offline
Junior Member
 
Join Date: Dec 2009
Location: Joliet, IL
Posts: 8
Thanks: 0
Thanked 2 Times in 1 Post
Default Mustang

Body is solid, straight, just matte back for now. The body is pretty low on my priority list. Straight and solid was all I really wanted. Brakes have to be first. I'm going to start making some calls soon about upgrades, but this will NOT be a maximum effort car, I just can't afford that.

Think nice driver.

Currently has a 351 Cleveland that has been rebuilt with a mild cam, a C4 trans that has also been rebuilt (but will be replaced with a 5 speed) and the original 8" rearend with 2.80 gears (also on the chopping block).

With 3 kids and working rotating 12 hour shifts, this will definitely be a long term, drive it as I upgrade it type deal.

Scatter'd
Reply With Quote
  #5  
Old 04-08-2020, 11:22 AM
1Bad68Cat 1Bad68Cat is offline
Senior Member
 
Join Date: May 2009
Location: Sun Diego
Posts: 112
Thanks: 2
Thanked 5 Times in 3 Posts
Default

Welcome to the group.

Since budget is a concern and it's not a max effort car, look to Mustang Steve for brackets that allow you to bolt the newer mustang brakes on. This will allow you to go to the parts store/dealer when you need replacements. Next up I would assume suspension. If budget minded, look into Open Tracker Racing for their upgraded stock parts. Lower the upper controls aka "Arning/Shelby" drop and that will greatly help with handling.
__________________
Robert Icasas

Projects:
67 Cougar
Art Morrison Sport IFS
3-link Rear Suspension
Coyote w/ D&D Performance Viper t56
Build: https://lateral-g.net/forums/showthread.php4?t=50170

Brother's 1966 Mustang Restomod
Mustang II front suspension
Torque Arm Rear Suspension
Ridetech Shockwaves
5.0 w/ Viper t56
Reply With Quote
  #6  
Old 04-08-2020, 10:00 PM
Scatterbrained Scatterbrained is offline
Junior Member
 
Join Date: Dec 2009
Location: Joliet, IL
Posts: 8
Thanks: 0
Thanked 2 Times in 1 Post
Default Thanks all!

Thanks everyone, I'll be sure to post pics of progress...


Scatter'd
Reply With Quote
  #7  
Old 04-10-2020, 09:57 AM
WSSix WSSix is online now
Lateral-g Supporting Member
 
Join Date: Nov 2008
Location: Dunwoody, GA
Posts: 6,280
Thanks: 643
Thanked 563 Times in 457 Posts
Default

x2 on using modern Mustang brakes. I love Tobin/Kore3 and have them on my car. If he has a kit for modern mustang brakes, you can't go wrong.

Mike Maier Inc, https://mikemaierinc.com/, has really great products for the car. I'm helping my buddy with the long term build of his 69 Grand Coupe. He's using Mike's parts and has similar goals as you do. I've been very impressed with Mike's sub frame connectors, x-brace, and pan hard rod kit.

Good luck and welcome to the site!
__________________
Trey

Current rides: 2000 BMW 540i/6 and 86 C10.

Former ride: 1979 Trans Am WS6: LT1/T56, Kore 3 C5/6 brakes, BMW 18in rims
Reply With Quote
  #8  
Old 05-29-2020, 12:01 PM
python python is offline
Member
 
Join Date: Nov 2012
Location: Amarillo, TX
Posts: 41
Thanks: 0
Thanked 8 Times in 7 Posts
Default

Glad to see some Fords going pro-touring.
Reply With Quote
The Following User Says Thank You to python For This Useful Post:
jarhead (10-15-2021)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:23 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net