...

Go Back   Lateral-g Forums > Technical Discussions > Shop & Equipment
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 10-22-2020, 03:56 PM
Trick-Tools.com's Avatar
Trick-Tools.com Trick-Tools.com is offline
Lateral-g Supporting Vendor
 
Join Date: Jan 2018
Location: Pella Iowa
Posts: 51
Thanks: 12
Thanked 19 Times in 13 Posts
Default Versa-Mount Tool Mounting System

Versa-Mount is an ever-growing line of space-saving tool mounts, and shop organization items designed to allow you to work more comfortably and efficiently. The Versa-Mount Wall and Table Mounts allow you to change out different tools quickly and easily by adding optional tool holders or building your own custom mounts. Great for sharing tools between your shop and your race trailer or work truck!





Keep your work surface clear and eliminate the need for a dedicated machine stand with these Versa-Mount receiver-style tool mounts.

https://www.trick-tools.com/Versa-Mount-Store-1120

The Bench Mount Receiver features a 6-inch square mounting surface with 5/8 diameter holes on 4-inch centers. It can be easily attached to your own workbench above or below the work surface. The hole pattern fits directly with popular Buildpro or Certiflat welding tables. The receiver also includes four jam bolts to produce a rock-solid fit for the tool mount. The receiver is designed to accept 2 x 3/16 inch wall square tubing. Planning to mount this receiver to your BuildPro table? We suggest using four shoulder bolts, BuildPro part number T831610.
https://www.trick-tools.com/Table-St...t-TT-RM1-13238

Completely free up work surfaces and eliminate floor space wasted on stands with our Wall Mount Tool Receiver. Featuring a 4 x 8 x 1/4 inch thick mounting surface with 3 mounting holes, it can be mounted to any vertical surface in the shop. In addition to a 5/8 inch detent pin, the mount also features two sets of jam bolts to produce a rock-solid fit for the receiver tube. The receiver is designed to accept 2 x 3/16 inch wall square tubing.
https://www.trick-tools.com/Trick-To...r-TT-RM3-13197

The Universal Mount is constructed from 2x2 3/16 wall square tubing and a 3/8 inch thick steel plate measuring 8.5 x 9.5 inches. The mounting plate features both 90 and 120-degree slots to accommodate a wide variety of tools, or you can drill your own holes as needed.
https://www.trick-tools.com/Trick-To...r-TT-RM2-12003

Use our Clamp Tube Mount along with one of our Trick-Tools Receiver Mounts to keep your favorite tool close at hand, but not take up valuable bench space. Add a Swivel Block with Universal Plate or Multi-Use Block to mount a variety of different tools. Built from 2-inch x 3/16 wall square tube and quick release handle finished in black crinkle powder coat.
https://www.trick-tools.com/index/pa...r+Swivel+Mount

The Swivel Block bolts to a JD2 Notchmaster, JMR TN1000, and TN300, and Bead Form Tool to use in the Trick Tools Swiveling Receiver Mount. It also accepts our Universal Mount Plate.
https://www.trick-tools.com/index/pa...Mounting+Block

The BuildPro Plate Swivel Block mounts Buildpro plates to Trick-Tools Clamp Arm.
https://www.trick-tools.com/index/pa...+with+Hardware

Bolt your Baileigh TN-250 to our Trick-Tools exclusive mounting block for the Trick-Tools Swivel Receiver Mount.
https://www.trick-tools.com/index/pa...aileigh+TN-250

We've developed this Universal Mounting Plate to provide a way to secure several of our most popular hand-operated tools. The mounting plate is laser cut from 1/2 thick steel that is then powder coated with an attractive black crinkle finish. The plate can be secured in a vise with the included clamping block, or use the block as a starting point to build your own stand. The plate comes drilled for the following machines, or drill your own holes to mount even more tools.
Our universal mounting plate comes pre-drilled for the following machines:
Beverly B1, B2, B3 throatless shears
Beverly SS2 and SS3 slitting shears
Roper Whitney 16 punch
Roper Whitney 17 punch
Lancaster shrinker and stretcher
https://www.trick-tools.com/Universa...UM-Plate-14856

Warranty:
1-year manufacturer's warranty

Trick-Tools.com
[email protected]
1.877.VAN.SANT
__________________
Brycen Smith
www.Trick-Tools.com
Fabrication Specialist for Marketing and Product Development
Van Sant Enterprises, Inc.
75 Truman Rd Pella, IA 50219
641-628-3860 Ext:117
[email protected]

Reply With Quote
The Following User Says Thank You to Trick-Tools.com For This Useful Post:
jarhead (11-13-2020)
  #2  
Old 11-13-2020, 11:13 AM
jarhead's Avatar
jarhead jarhead is offline
Lateral-g Supporting Member
 
Join Date: Dec 2011
Location: Colorado, in a van down by the river
Posts: 1,064
Thanks: 317
Thanked 109 Times in 74 Posts
Default

Maybe I missed it, but do you have a way to store multiple tools on a wall somewhere, or are they just laid on a shelf until needed?
Thanks!
__________________
joe
Semper Fi
Reply With Quote
  #3  
Old 11-13-2020, 02:06 PM
Trick-Tools.com's Avatar
Trick-Tools.com Trick-Tools.com is offline
Lateral-g Supporting Vendor
 
Join Date: Jan 2018
Location: Pella Iowa
Posts: 51
Thanks: 12
Thanked 19 Times in 13 Posts
Default

Quote:
Originally Posted by jarhead View Post
Maybe I missed it, but do you have a way to store multiple tools on a wall somewhere or are they just laid on a shelf until needed?
Thanks!
we are currently working on some storage options but as of today, it would be up to you on storage.
__________________
Brycen Smith
www.Trick-Tools.com
Fabrication Specialist for Marketing and Product Development
Van Sant Enterprises, Inc.
75 Truman Rd Pella, IA 50219
641-628-3860 Ext:117
[email protected]

Reply With Quote
The Following User Says Thank You to Trick-Tools.com For This Useful Post:
jarhead (11-13-2020)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:49 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright Lateral-g.net