...

Go Back   Lateral-g Forums > Technical Discussions > Interior and Electrical
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 09-19-2010, 12:18 PM
wrighton wrighton is offline
Member
 
Join Date: Nov 2008
Posts: 51
Thanks: 0
Thanked 0 Times in 0 Posts
Default Mini Tub Rear Seat Narrowing

I am curious if any body can put up some pictures of Rear Seats or the process with measurements to narrow a stock 68 camaro rear seat to fit the mini tubs. Thank you for any imput.
Reply With Quote
  #2  
Old 10-12-2010, 01:55 AM
redz redz is offline
Junior Member
 
Join Date: Oct 2010
Posts: 4
Thanks: 0
Thanked 4 Times in 1 Post
Default

Get some round bars at the hardware store. It cost me $12. Starting with the seat back, you need to add one vertical bar and 3 "S" shaped horizontal bars on each side and then cut off the old bars to make room for the larger wheel well. Place the vertical bar in the depression of the existing springs. Make sure you put wet towels down before you weld. The old padding burns very easily. The seat bottom is more of a challenge. There is one wire that needs 3 clips undone. The wire needs to be bent with vise grips and then re attach the 3 clips in the new position. I found my welding pliers worked the best on opening these clips. Cut the two wiggly springs after you have re attached the wire. Add 2 bars and then cut off the corner of the frame.
BTC
Attached Images
      
Reply With Quote
The Following 4 Users Say Thank You to redz For This Useful Post:
572Camaro (01-24-2021), 68454RS (01-25-2021), Rodknock (03-26-2020), WILWAXU (04-27-2020)
  #3  
Old 10-17-2010, 12:07 AM
Richio1's Avatar
Richio1 Richio1 is offline
Lateral-g Supporting Member
 
Join Date: Jan 2008
Location: Napa, Ca
Posts: 759
Thanks: 0
Thanked 0 Times in 0 Posts
Talking

This is awesome... thank you for posting the detailed pics. I needed this info too so this is perfect. I will be doing mine in a month or two.

Thanks!
Reply With Quote
  #4  
Old 11-26-2010, 05:14 PM
JB69ER JB69ER is offline
Junior Member
 
Join Date: Feb 2008
Location: SAN DIEGO
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Great Pictures And Info.
Now If I Can Make Mine Folding Also, All Will Be Good!!! THEY DID THIS ON MUSCLE CARS SEVERAL YEARS AGO..

ALSO THAT ROD LOOKS LIKE "PENCIL ROD" = SMALL 1/4 - 5/16 NON-DEFORMED RE-BAR USED WITH BRICKWORK,
AVAILABLE AT A MASONRY SUPPLY YARD.

Last edited by JB69ER; 11-26-2010 at 05:23 PM.
Reply With Quote
  #5  
Old 11-27-2010, 02:02 AM
holschen's Avatar
holschen holschen is offline
Member
 
Join Date: Oct 2006
Posts: 61
Thanks: 0
Thanked 0 Times in 0 Posts
Default

thanks this is great info
__________________
camaro69-l92+6l80e-
speedtech(LCA)-ats Street-Comp AFX-unisteer r&p-VariShock
camaro 5gen rear
Hydratech Brake Booster
movit brakes 380mm 6piston front- brembo 465mm 4piston rear
275/30-19 front-325/25-20 rear
19x9f 20x12r cray scorpions
Reply With Quote
  #6  
Old 11-28-2010, 12:22 AM
redz redz is offline
Junior Member
 
Join Date: Oct 2010
Posts: 4
Thanks: 0
Thanked 4 Times in 1 Post
Default

I used 8' of 1/4" rod and 4' of 5/16" rod. Costs about $12 at the hardware store.
Reply With Quote
  #7  
Old 02-01-2019, 08:35 PM
71-Formula's Avatar
71-Formula 71-Formula is offline
Member
 
Join Date: Jul 2016
Posts: 96
Thanks: 25
Thanked 32 Times in 29 Posts
Default




Sent from my iPhone using Tapatalk
Reply With Quote
  #8  
Old 03-26-2020, 12:25 AM
Rodknock's Avatar
Rodknock Rodknock is offline
Senior Member
 
Join Date: Mar 2013
Location: Golden Valley/Kingman AZ
Posts: 159
Thanks: 80
Thanked 104 Times in 53 Posts
Default

Quote:
Originally Posted by 71-Formula View Post



Sent from my iPhone using Tapatalk
Narrowed TMI seats? That's what I'm looking at doing for mine
__________________
John Rodko
69 Camaro RS/SS
Rolling shell, minimal rust.
Heidts Pro G IRS/ Heidts Pro G Front
DSE mini tubs
TMI interior
4L80E
6.0L TT? Maybe
https://www.facebook.com/Angry-Johnn...?ref=bookmarks
Reply With Quote
  #9  
Old 04-27-2020, 12:19 PM
cmb396 cmb396 is offline
Member
 
Join Date: Dec 2009
Posts: 20
Thanks: 1
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Rodknock View Post
Narrowed TMI seats? That's what I'm looking at doing for mine
Can these be ordered from TMI like this, or do you have to order standard size and make it fit?
Reply With Quote
  #10  
Old 04-28-2020, 11:39 AM
Rodknock's Avatar
Rodknock Rodknock is offline
Senior Member
 
Join Date: Mar 2013
Location: Golden Valley/Kingman AZ
Posts: 159
Thanks: 80
Thanked 104 Times in 53 Posts
Default

Quote:
Originally Posted by cmb396 View Post
Can these be ordered from TMI like this, or do you have to order standard size and make it fit?
I called TMI, and they said you have to order standard and narrow them yourself. They said, too many variables in mini tub styles to make one seat fit all.
__________________
John Rodko
69 Camaro RS/SS
Rolling shell, minimal rust.
Heidts Pro G IRS/ Heidts Pro G Front
DSE mini tubs
TMI interior
4L80E
6.0L TT? Maybe
https://www.facebook.com/Angry-Johnn...?ref=bookmarks
Reply With Quote
The Following User Says Thank You to Rodknock For This Useful Post:
cmb396 (04-29-2020)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:59 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net