...

Go Back   Lateral-g Forums > Technical Discussions > LSX Conversions
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 10-22-2011, 09:09 PM
johnnymac46's Avatar
johnnymac46 johnnymac46 is offline
Senior Member
 
Join Date: May 2010
Location: Virginia Beach, VA
Posts: 313
Thanks: 1
Thanked 14 Times in 12 Posts
Default L9H Oil Filter Problem

I noticed an pool of oil under my truck today with the L9H. After a quick investigation I found my oil filter was not tight.

I have put less than 1000 miles on the truck since I bought it(has 21K). It has not been leaks oil prior to today, which makes me wonder why oil filter suddenly decided to loosen its self.

Any thoughts?
Is it something I should take in to get checked out immediately, or see if it's fixed?

As usual thanks for the help.
Reply With Quote
  #2  
Old 10-22-2011, 09:55 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,579
Thanks: 4,189
Thanked 1,443 Times in 625 Posts
Default

filters usually do not loosen up; they tighten up. I would pull the filter and make sure that the o-ring seal from the previous filter isn't stuck to the block when the oil was changed.

I'll add that if there isn't an extra o-ring in there I'd swap the filter anyway, just for piece of mind. Grab a new filter before you pull that one off so you can do it in one shot. Pretty cheap insurance.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank

Last edited by camcojb; 10-22-2011 at 10:12 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:41 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net