...

Go Back   Lateral-g Forums > Lateral-G Open Discussions > Open Discussion
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 10-02-2020, 07:54 AM
69hugger's Avatar
69hugger 69hugger is offline
Senior Member
 
Join Date: Feb 2014
Location: Minneapolis, MN
Posts: 449
Thanks: 136
Thanked 83 Times in 42 Posts
Default Dual disc clutch recommendations?

It is time to ditch my T-56 trans & LT pull style clutch setup and upgrade to a Magnum and dual disc clutch. This is behind a 502 based big block with a 1 piece main seal. My engine is internally balanced. It has 700 ft/lb. of torque.
Having heard great things, my thought was to use a Centerforce DYAD, but Centerforce tells me they have no flywheel for the 1 piece seal crank that is internally balanced.

The only twin disc setup I have found is a McCleod RST clutch. They can offer either an aluminum (my choice) or steel flywheel. Then there is an adapter ring that bolts to the flywheel to mount the dual disc setup.

I am looking for any experiences with the RST clutch setup, good or bad, or any other options I have missed.

Thanks in advance for any help!!
__________________
Bill


'69 Camaro / 534 BBC / DSE Built
'67 C10 / LS-3 Magnuson / Roadster Shop Chassis
Reply With Quote
  #2  
Old 10-02-2020, 01:24 PM
Musclerodz's Avatar
Musclerodz Musclerodz is offline
Senior Member
 
Join Date: Nov 2004
Location: washington, ok
Posts: 4,273
Thanks: 22
Thanked 159 Times in 93 Posts
Default

Dyad
__________________
Mike Redpath
Musclerodz & Customz
facebook page
Reply With Quote
  #3  
Old 10-02-2020, 02:13 PM
carbuff's Avatar
carbuff carbuff is offline
Senior Member
 
Join Date: Dec 2004
Location: Austin, Tx
Posts: 1,306
Thanks: 6
Thanked 19 Times in 13 Posts
Default

Monster LT1-S if they have the flywheel you need. I do not know if they do anything for big blocks, but I loved this clutch behind my LS-based engine. Uses GM disks and pressure plate from the C7 LT1, has the holding power you need, and is a very smooth stock-like feel. I never had a problem with it at all.

https://monsterclutches.com/twin-lt1s-street-gto-clutch

That isn't the exact setup you need, but it's where to start looking. Give them a call to see if they have what you need.
Reply With Quote
The Following User Says Thank You to carbuff For This Useful Post:
69hugger (10-02-2020)
  #4  
Old 10-03-2020, 10:50 AM
anguilla1980's Avatar
anguilla1980 anguilla1980 is offline
Member
 
Join Date: Aug 2016
Location: Bakersfield, CA
Posts: 35
Thanks: 20
Thanked 10 Times in 6 Posts
Default

I couldn't be happier with my RAM clutch. Best dual disc clutch I've ever used in any car for street and track.



Give them a call and see what they can do for your combo.
__________________
https://www.TheFoat.com/92GTA
1969 Pontiac Firebird w/535ci IAII aluminum block, Dailey dry sump, Holley EFI (full road race build). Primer black w/black interior.
1992 Pontiac Trans Am GTA w/SLP Performance Package. Dark Jade Grey Metallic, grey leather, T-Tops.
Reply With Quote
The Following User Says Thank You to anguilla1980 For This Useful Post:
69hugger (10-03-2020)
  #5  
Old 10-05-2020, 01:18 PM
DRJDVM's '69's Avatar
DRJDVM's '69 DRJDVM's '69 is offline
Senior Member
 
Join Date: Jul 2004
Location: Manteca, CA
Posts: 1,299
Thanks: 2
Thanked 48 Times in 26 Posts
Default

Put a McLeod in my Cuda just recently behind a 6.1 HEMI and t56....... and at idle, out of gear, with the clutch out its loud as hell...... sounds like rod knock.... talked to Bowler and McLeod and they both stated "yep... thats the way they are..... no spring , so the plates tend to vibrate and make noise"... WTF? Its brand new and $1300, so I'm kind of stuck with it now.... my only hope is that it gets better as it gets broken in.... fingers crossed
Reply With Quote
The Following User Says Thank You to DRJDVM's '69 For This Useful Post:
69hugger (10-05-2020)
  #6  
Old 10-05-2020, 06:27 PM
69hugger's Avatar
69hugger 69hugger is offline
Senior Member
 
Join Date: Feb 2014
Location: Minneapolis, MN
Posts: 449
Thanks: 136
Thanked 83 Times in 42 Posts
Default

After a little more research and talking to Centerforce, they DO have a dyad for my setup. As they are supposed to be quiet, are only a little more than McLeod, and look like a very stout setup, I am pretty sure that is the way I’m headed.
Thank you all for the input!
__________________
Bill


'69 Camaro / 534 BBC / DSE Built
'67 C10 / LS-3 Magnuson / Roadster Shop Chassis
Reply With Quote
The Following User Says Thank You to 69hugger For This Useful Post:
camcojb (10-05-2020)
  #7  
Old 10-05-2020, 09:00 PM
Musclerodz's Avatar
Musclerodz Musclerodz is offline
Senior Member
 
Join Date: Nov 2004
Location: washington, ok
Posts: 4,273
Thanks: 22
Thanked 159 Times in 93 Posts
Default

Quote:
Originally Posted by 69hugger View Post
After a little more research and talking to Centerforce, they DO have a dyad for my setup. As they are supposed to be quiet, are only a little more than McLeod, and look like a very stout setup, I am pretty sure that is the way I’m headed.
Thank you all for the input!
Their not heavy either like alot of other clutches
__________________
Mike Redpath
Musclerodz & Customz
facebook page
Reply With Quote
The Following User Says Thank You to Musclerodz For This Useful Post:
69hugger (10-06-2020)
  #8  
Old 10-06-2020, 12:24 PM
cwylie cwylie is offline
Senior Member
 
Join Date: Sep 2009
Posts: 392
Thanks: 0
Thanked 15 Times in 6 Posts
Default

I strongly urge you to check out the new tilton street twin. Im very impressed with mine and everything is billet and completely rebuildable.
Reply With Quote
The Following User Says Thank You to cwylie For This Useful Post:
69hugger (10-06-2020)
  #9  
Old 10-07-2020, 04:31 PM
will69camaro will69camaro is offline
Lateral-g Supporting Member
 
Join Date: Dec 2004
Location: Houston
Posts: 1,413
Thanks: 216
Thanked 125 Times in 74 Posts
Default

Been happy with my Spec Supertwin ST trim. Has held all the power i've asked it to so far (1000+rwhp) and friends is consistently holding 1500rwhp.

Drives very well and pedal pressure is not too firm. Does make a little noise clutch out in neutral, but almost un-noticeable above the idle of the car (and my car isn't loud).

William
__________________
Texas A&M BSME 2008
1969 Camaro - Hugger Orange
1969 C10 SWB - Hugger Orange
2018 GMC Denali HD
Reply With Quote
  #10  
Old 10-07-2020, 09:26 PM
Che70velle's Avatar
Che70velle Che70velle is offline
Senior Member
 
Join Date: Aug 2012
Location: Dawsonville Georgia
Posts: 2,219
Thanks: 609
Thanked 157 Times in 109 Posts
Default

RPS BC2 in my Chevelle. It’s pricey, but it’s carbon which means crazy long life. Zero chatter and it’s smooth as butter. My wife could drive the car easily.
__________________
Scott
---------------------------------------------------------------
70 velle' on custom chassis w/custom RideTech coilovers, RED sleeved 434” with Mamo 265’s, F-body Magnum, 12 bolt 3:73, wilwood 6/4's, bla, bla, bla...build. thread https://lateral-g.net/forums/showthread.php4?t=39631
New 434” engine build here https://ls1tech.com/forums/generatio...ved-block.html

Thanks Dad!!

My Chevelle is old school... It has a belt driven power steering pump.
They're 17's, but I keep em clean!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:08 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net