...

Go Back   Lateral-g Forums > Lateral-G Open Discussions > Open Discussion
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 11-23-2020, 07:36 PM
XLexusTech XLexusTech is offline
Senior Member
 
Join Date: Jun 2007
Posts: 1,266
Thanks: 72
Thanked 71 Times in 44 Posts
Default GM IdidIT column

OMG ready to loose it after loosing so much time today.
Anyone know the thread and pitch on IdidIt column nut for the steering wheel?

I see lots of wheel tool kits have 9/16 -18 threads... before i overnight a kit wanted to ck here


ordered based on https://www.summitracing.com/parts/idt-9200041740

Last edited by XLexusTech; 11-23-2020 at 10:53 PM.
Reply With Quote
  #2  
Old 11-24-2020, 04:12 AM
Bad Bowtie Bad Bowtie is offline
Senior Member
 
Join Date: Apr 2006
Location: Central Florida
Posts: 190
Thanks: 1
Thanked 11 Times in 9 Posts
Default

Lexus,
If your looking for just the nut here is what I've read fits.

https://www.summitracing.com/parts/i...yABEgL8XvD_BwE

BB
Reply With Quote
  #3  
Old 11-30-2020, 12:33 PM
camcojb's Avatar
camcojb camcojb is online now
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 11,644
Thanks: 1,000
Thanked 453 Times in 178 Posts
Default

Probably too late, but mine is 9/16" fine thread.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
Centerforce for their DYAD Clutch Kit
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Reply With Quote
The Following User Says Thank You to camcojb For This Useful Post:
XLexusTech (11-30-2020)
  #4  
Old 11-30-2020, 07:02 PM
XLexusTech XLexusTech is offline
Senior Member
 
Join Date: Jun 2007
Posts: 1,266
Thanks: 72
Thanked 71 Times in 44 Posts
Default so more Info...

SO here is more info... I needed to adjust the directional lever and made the mistake of removing the C clip. NO big deal right well not so much.. the Idid it column uses a 65 lb spring to load the upper bearing. that spring is held in with the horn contact.... and a c-clip.... Ididit provides a kit with a tube.. to lock it in.. but i wasn't going for it..

TLDR.. ordered a cheap puller kit from amazon.. needed the thread pitch to make sure the tool would work.. paid 20 bucks was worth every penny..
Reply With Quote
The Following User Says Thank You to XLexusTech For This Useful Post:
camcojb (11-30-2020)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:01 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright Lateral-g.net