|
07-19-2016, 10:23 PM
|
|
Lateral-g Supporting Member
|
|
Join Date: Apr 2015
Posts: 631
Thanks: 1,197
Thanked 663 Times in 294 Posts
|
|
70 Camaro - Boise, Idaho
Restarting my thread in the Project Update Forum. I started in early 2014 with a complete tear down, blast an epoxy. Tubs, 4 link, some rust repair, cage, sub-frame and some interior work including new trans and trans tunnel is all complete. A ton of pictures following. Thanks again to everyone for your inspiring builds.
|
The Following User Says Thank You to Goosesdad For This Useful Post:
|
|
07-19-2016, 10:26 PM
|
|
Lateral-g Supporting Member
|
|
Join Date: Apr 2015
Posts: 631
Thanks: 1,197
Thanked 663 Times in 294 Posts
|
|
More pictures
|
07-19-2016, 10:30 PM
|
|
Lateral-g Supporting Member
|
|
Join Date: Apr 2015
Posts: 631
Thanks: 1,197
Thanked 663 Times in 294 Posts
|
|
Additional Pics
|
07-19-2016, 10:31 PM
|
|
Lateral-g Supporting Member
|
|
Join Date: Apr 2015
Posts: 631
Thanks: 1,197
Thanked 663 Times in 294 Posts
|
|
Some more pictures
|
07-19-2016, 10:58 PM
|
|
Lateral-g Supporting Member
|
|
Join Date: Apr 2015
Posts: 631
Thanks: 1,197
Thanked 663 Times in 294 Posts
|
|
Installed sort of a reverse mold for the custom fiberglass interior panels, probably seems a little strange to use wood, expanding foam insulation and drywall putty....but this was a quick way to shaping this mold. Then I laminated glass over the top. Of course this will all get removed later in the build and the glass will be covered with leather and alcantera. The wood mold will get removed and tossed, of course then I will need to mount the interior panels, truth be told, I haven't figured that out yet but I wanted to get this done prior to installing the roll cage so I could put the cage bars tucked up as tight as possible. It looks rough now...but it's a good base with a cool shape.
|
07-19-2016, 11:09 PM
|
|
Lateral-g Supporting Member
|
|
Join Date: Apr 2015
Posts: 631
Thanks: 1,197
Thanked 663 Times in 294 Posts
|
|
Roll Cage was next. I left the door bars off for now, just to make access easier.
|
07-19-2016, 11:34 PM
|
|
Lateral-g Supporting Member
|
|
Join Date: Apr 2015
Posts: 631
Thanks: 1,197
Thanked 663 Times in 294 Posts
|
|
Subframe and Firewall Part 1
|
07-20-2016, 12:03 AM
|
|
Lateral-g Supporting Member
|
|
Join Date: Apr 2015
Posts: 631
Thanks: 1,197
Thanked 663 Times in 294 Posts
|
|
Had to modify the bottom of the doors to fit around the cage and also installed Ring Bros hinges. Pretty Sweet pieces.
|
07-20-2016, 12:40 AM
|
|
Lateral-g Supporting Member
|
|
Join Date: Apr 2015
Posts: 631
Thanks: 1,197
Thanked 663 Times in 294 Posts
|
|
Seat mounting brackets. Went through a couple redesigns but for certain have DSE to thank for the concept from one of their first gens. I spent a fair amount of time notching the sub frame connectors and lowering the seat mounts in order to get my head as far away from the rollbar as possible. There is another 1/2" to be had by modifying the seat brackets...for another day.
|
07-20-2016, 12:42 AM
|
|
Lateral-g Supporting Member
|
|
Join Date: Apr 2015
Posts: 631
Thanks: 1,197
Thanked 663 Times in 294 Posts
|
|
Mounted the seats and did some test fitting of the door bars.
|
The Following User Says Thank You to Goosesdad For This Useful Post:
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 12:56 PM.
|