Ok, finally getting around to making a project thread here. Don't have all the project pictures but here are a few. This car is a driver so no nice clean engine or underbody shots.
Engine
409CID Small Block Chevy (Decked, Splayed)
AFR 210CC race ready heads
Solid Roller Cam
6" Rods
Victor Jr Intake
MSD 6al
Headman Hustler Headers to 3" spintech oval exhaust
Chassis
SC&C Adjustable Arms W/Tall balljoint
Varishocks w/ Hotchkis springs
Hotchkis sway bar
C5 front brakes w/ Hydroboost brake booster
T56
Gbar Rear suspension w/10 bolt 4.10 gears
DSE Mini Tubs
S&W Roll Bar
Hotchkis subframe connectors
C6Z06 Rims 18x8.5 front 18x10.5 rear
Home made front splitter
as it sat a couple years ago
Body Work wasn't too bad. Cheater quaters, 1 new outer wheel house small patch on the door.
Tubs
Cage in
T56 install hit the floor due to a slight variation in the floor (you can see the fold in the metal). I needed to remove some of the welds and straighten out were the floor was hitting. I also gave that ear some plastic surgery.
Painted but not digging the chrome now
Splitter
As it sits now painted Rims / Splitter I think it just looks mean.
Currently have but not installed (yet):
Vortech Supercharger (this is going to be a big project)
KRC pump w/ external tank
Lee Steering Box
C5 rear discs brakes
BF Goodrich KD's
Probably won't get many more updates since I plan on just driving this for a while.
Nick