...

Go Back   Lateral-g Forums > Technical Discussions > Transmission and Rear End
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 08-04-2009, 10:06 PM
1Bad67 1Bad67 is offline
Junior Member
 
Join Date: Dec 2006
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default Muncie dimension needed

Does anyone have a muncie they could measure the c-c distance between the main shaft and the counter shaft on?

Thanks,
Eric
Reply With Quote
  #2  
Old 08-07-2009, 11:03 PM
67ragtp 67ragtp is offline
Senior Member
 
Join Date: Jul 2005
Posts: 858
Thanks: 0
Thanked 1 Time in 1 Post
Default

Eric,

3.25" +/- .010 with 1" counter shaft(cluster gear shaft)

Big hole at the mid plate in the case is 4.650"
little hole for cluster shaft .996
space between them .425"

Hope this helps - Rich
Reply With Quote
  #3  
Old 08-09-2009, 11:23 PM
1Bad67 1Bad67 is offline
Junior Member
 
Join Date: Dec 2006
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thats what I needed. I wanted to hear 3.000 though

Thanks,
Eric
Reply With Quote
  #4  
Old 08-10-2009, 06:15 AM
67ragtp 67ragtp is offline
Senior Member
 
Join Date: Jul 2005
Posts: 858
Thanks: 0
Thanked 1 Time in 1 Post
Default

Eric,

I think the centers woud be closer to 3.0" if you were using the 325 case which uses a smaller cluster shaft(I could be wrong). I believe the shaft is around .750" . Dont have the small case here to measure, if this is the reason your coming up short, Jody at pro-touring.com from jodys transmissions could probably get you the dimensions.

Rich
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:40 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net