...

Go Back   Lateral-g Forums > Technical Discussions > Interior and Electrical
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 04-30-2023, 04:53 AM
69C40Hx 69C40Hx is offline
Junior Member
 
Join Date: Jun 2021
Posts: 7
Thanks: 1
Thanked 4 Times in 3 Posts
Question mounting the new Vintage Air Gen 5 for 69 Camaro

Vintage Air recently released a completely redesigned "Gen 5" version of their HVAC system for the 1969 Camaro. I was planning on using the Detroit Speed mounting bracket to install their previous Gen IV version but it appears it won't work anymore with the new Gen 5 since the case and basically everything else has been completely redesigned.

Just wondering if anybody has tried mounting the new Gen 5 with the DSE bracket or modifying it to work? Any other similar mounting solutions? I have a smooth firewall so I didn't want any mounting hardware poking through. I know the Gen 5 is probably too new but just wanted to see what guys were doing when they get their hands on it. Thanks!

Last edited by 69C40Hx; 04-30-2023 at 11:19 PM.
Reply With Quote
  #2  
Old 04-30-2023, 05:16 AM
130fe 130fe is offline
Lateral-g Supporting Member
 
Join Date: Jan 2005
Location: Jacksonville, FL
Posts: 767
Thanks: 204
Thanked 38 Times in 27 Posts
Thumbs up

Dutchboys is doing a camaro for member Charley Lillard (Clill). If you look at this thread starting at post 307 for the mounts they did. Great pieces, I want them in my Gen V when I put it in my car.

https://lateral-g.net/forums/showthr...=59131&page=31
__________________
Chris
1968 Camaro SS
LS3/T56
Full of DSE and Holley parts
Reply With Quote
  #3  
Old 04-30-2023, 10:28 AM
srode1 srode1 is offline
Senior Member
 
Join Date: Jan 2021
Location: Cincinnati Ohio
Posts: 141
Thanks: 131
Thanked 57 Times in 41 Posts
Default

The one you referenced is a 67 so it's going to be a bit different but the approach might help
Reply With Quote
  #4  
Old 09-25-2023, 07:03 PM
69C40Hx 69C40Hx is offline
Junior Member
 
Join Date: Jun 2021
Posts: 7
Thanks: 1
Thanked 4 Times in 3 Posts
Default

UPDATE:

I bought the Vintage Air 961245 (561245) "Gen 5" system for my non-AC 69 Camaro. Have the evaporator in hand now and it appears the general shape, size, and mounting locations are the same as the Gen IV evaporator.

However, Vintage Air told me they didn't think the DSE mounting bracket would work with the Gen 5. I also called DSE and they didn't know if the bracket would work with the Gen 5 and said they didn't have any plans to verify or update it at this time.

I don't feel like wasting $200 to buy the DSE bracket to see if it'll work so I will attempt to mount the Gen 5 evaporator by welding studs on the interior firewall to mount the new Gen 5 mounting bracket and still have a smooth firewall.

A side note, the Gen 5 system is MUCH MUCH nicer and more refined than the previous Gen IV system. The blower motor is also 20% more powerful.

Last edited by 69C40Hx; 09-26-2023 at 01:59 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:34 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net