...

Go Back   Lateral-g Forums > Classifieds > Cars for Sale
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 11-10-2017, 08:43 PM
bwindy bwindy is offline
Member
 
Join Date: Sep 2005
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts
Default 1968 Camaro Pro Touring

Item Location (City/State): Indianapolis, IN

Price: $58,000

Description:

Contact: Brian ([email protected] 317-418-8870)

I have decided to sell my 1968 Camaro. I bought it as it had a very straight body and I had always wanted to do a restoration on a first generation Camaro. I ended up going much further into the restoration with it ending up more of a Resto-Mod or Pro-Touring build. It took about 2 ½ years of work to get it where it is now. The car only has about 2300 miles on it since the project was completed. Either way it was a great build and I have enjoyed it but it is time to move on. Here are the details:

Suspension / Steering
Front Dampers/Springs: QA1 Coil Over
Rear Dampers/Springs: Pro-Shock dampers with Hotchkiss leaf springs; damper
mounting points moved inboard for more tire clearance
Quick ratio power steering box with KRC pump
Hotchkiss Anti-Rollbar (Front/Rear)
Rear suspension Caltracs system to reduce wheel hop

Brakes
Baer Brakes: Baer Track Brake System with 13” front and rear rotors

Engine
Long Block
Block: 1974-454ci bored to 4.31” (496ci) -Block Ht 9.780”-
Crank: Eagle Forged 4340 (45442506385-CCW) Internal Balance
Rods: Eagle “ESP” H-Beam CRS63853D (6.385”)
Pistons: SRP Forged 142980 4.310” (8.5:1)
Cam: Comp Cams 11-414-8 (grind CB NX298HR-13) Gross Lift .566/.575, Duration @ .050” 242/254,
Lobe Seperation 113.0 degree
Lifters: Comp Cams Hydraulic Roller Retro Fit (854-16)
Pushrods: Comp Cams (Intake-7813, Exhaust-7814)
Rockers: Harland Sharp
Heads: AFR 325 CNC Bowls (X2101-F) Intake 2.30” Exhaust 1.88” (springs 924-16)
Head Gaskets: Cometic 4.375” .040” (C5329-040)

Fuel Delivery
EFI System: Big Stuff 3 Base System with DAI
Intake: Accel Pro Ram Rectangle Port (74202D)
Throttle Body: Wilson 100 deg Elbow with 90mm throttle body (471090)
Injectors: Siemens 3105 Low Impedance 83#/hr
Fuel Lines: SS tube .50” x .035”
Fuel Pump: Aeromotive A1000
Fuel Pump Speed Controller: Aeromotive 16306 Billet Fuel Pump Speed Controller
Fuel Pump Regulator: Magnafuel Pro Star EFI Regulator MP-9950B
Fuel Filters: Aeromotive Pre filter 100 micron (12304) and 10 micron (12301)
Fuel Cooling System: Setrab Oil Cooler with fan

Ignition
Distributor: MSD 2345 Cam Sync with phased rotor
Ignition Control: MSD 6BTM
Ignition Timing Settings: Variable timing controlled by ECU

Air Delivery
Super Charger: Procharger D1SC with Carbinite Pro-Grip pulley coating
Boost Surge Control: Procharger ProFlo Surge Valve

Cooling System
Radiator: C&R custom radiator
Water Pump: CSR Billet Electric (CSR900N)
Surge Tank: C&R Surge Tank w/ sight tube
Fan: Spal Dual 11” 2800 CFM

Exhaust
Hooker Headers with X-Pipes
Flowmaster Mufflers

Transmission / Rear End
Tremec TKO600 (26 spline x 1 1/8”)
McLeod aluminum flywheel with RTS Street Twin Clutch
Moser Ford 9” with True Trac Limited Slip (3.50 ratio)

Body / Paint
Body taken down to bare metal with only minor bodywork required
House of Kolor: Tangelo Orange (PBC32) with Snow White (PBC44) stripes

Interior
New clean carpet
Summit Racing Sport Seats
Stock Rear Seats
Autometer gauges
5” Speedometer and Tachometer installed in stock gauge bezel
2 1/16” Fuel Level, Oil Press, Voltmeter, Water Temp, Boost Press installed in custom carbon
dash
Stereo: Alpine stereo, 2 x 10” subs, 2 x 6.5” and 2 x 5.25 speakers; 2 amps (850 & 550 watt)
Custom console

Electrical System
The stock fuse box was used with custom wiring from the box in both directions throughout the car.
A secondary fuse box was used for the fuel injection and support systems.
Big Stuff 3 wiring harness is used for the main fuel injection system.

Wheels / Tires
Wheels: Intro Twisted Classic (Front – 8.0” x 17”, Rear – 9.5” x 17”)
Tires: Front – Nitto NT555 P245 / 45 ZR17, Rear – Nitto NT01 P275 / 40 ZR17


Start Up Video
https://www.dropbox.com/s/b1dos5n276...artUp.mp4?dl=0

(Keep in mind it takes a few seconds for the Dropbox link to load)



I will include the laptop to program the fuel injection as well as help you understand how all of the programing works.





https://lateral-g.net/forums/attachme...1&d=1510367952
https://lateral-g.net/forums/attachme...1&d=1510367952
https://lateral-g.net/forums/attachme...1&d=1510367952
https://lateral-g.net/forums/attachme...1&d=1510367952
https://lateral-g.net/forums/attachme...1&d=1510367952
https://lateral-g.net/forums/attachme...1&d=1510367952
https://lateral-g.net/forums/attachme...1&d=1510367952
https://lateral-g.net/forums/attachme...1&d=1510367952
https://lateral-g.net/forums/attachme...1&d=1510367952
https://lateral-g.net/forums/attachme...1&d=1510367952
Attached Images
          

Last edited by bwindy; 02-01-2018 at 11:24 AM.
Reply With Quote
  #2  
Old 02-01-2018, 11:24 AM
bwindy bwindy is offline
Member
 
Join Date: Sep 2005
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts
Default

$58,000
Reply With Quote
  #3  
Old 05-26-2018, 06:59 PM
bwindy bwindy is offline
Member
 
Join Date: Sep 2005
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Still for sale. $49,000
Reply With Quote
  #4  
Old 07-03-2018, 09:35 PM
bwindy bwindy is offline
Member
 
Join Date: Sep 2005
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Sold
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:09 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net