...

Go Back   Lateral-g Forums > Lateral-G Open Discussions > Project Updates
User Name
Password



Reply
 
Thread Tools Display Modes
  #91  
Old 07-19-2021, 01:16 PM
Kmelander Kmelander is offline
Senior Member
 
Join Date: Jan 2017
Posts: 104
Thanks: 43
Thanked 92 Times in 58 Posts
Default

Quote:
Originally Posted by ScotI View Post
What is your plan for updating the front suspension geometry to match the rear half refinements?

I really like your approach for this build. Very relatable using/tweaking what you have vs. the expensive (& usually faster) route of purchasing new/aftermarket suspension bits.
I'm replacing the front suspension with CPP tubular control arms, Viking coil over shocks and a CPP C5 wheel kit. The wheel kit includes the steering knuckle, ball joints, unitized hub, GM type twin piston calipers plus rotors. I believe the steering knuckle has a raised upper ball joint for improved geometry. The spindle height is listed as stock I believe. The control arms, shocks and springs have arrived. I'm waiting for the wheel kit and I still need to order the front anti-sway bar, steering box and linkage.
Attached Images
   
Reply With Quote
  #92  
Old 08-01-2021, 07:22 PM
Kmelander Kmelander is offline
Senior Member
 
Join Date: Jan 2017
Posts: 104
Thanks: 43
Thanked 92 Times in 58 Posts
Default

The race shop finished up my engine last week so I took a ride up on Friday to see a couple of pulls.

https://youtu.be/X3A7kLBLRVU
Attached Images
  
Reply With Quote
The Following User Says Thank You to Kmelander For This Useful Post:
Roscoe03 (08-02-2021)
  #93  
Old 08-12-2021, 09:44 AM
Kmelander Kmelander is offline
Senior Member
 
Join Date: Jan 2017
Posts: 104
Thanks: 43
Thanked 92 Times in 58 Posts
Default

update - Both quarters are fully welded and prepped with and 1 skim coat of Duraglas filler. I'll put another coat of the duraglas on each side then finalize the inside seams. For those, I'm planning on brush coating with EW rust encapsulator paint then applying seam sealer.
Attached Images
          
Reply With Quote
The Following User Says Thank You to Kmelander For This Useful Post:
Roscoe03 (08-12-2021)
  #94  
Old 08-12-2021, 04:11 PM
egoman's Avatar
egoman egoman is offline
Senior Member
 
Join Date: Jul 2016
Location: Rosser Manitoba Canada
Posts: 339
Thanks: 14
Thanked 52 Times in 46 Posts
Default

Kudos on the bodywork. I am dreading the stuff I have to do and its nothing compared to your stuff.
__________________
The "Biggest" thing in motocross!
My build thread, Transcona, The dirty old Cougar!
https://lateral-g.net/forums/showthread.php?t=58877
Reply With Quote
The Following User Says Thank You to egoman For This Useful Post:
Kmelander (08-15-2021)
  #95  
Old 08-12-2021, 05:55 PM
ScotI ScotI is offline
Senior Member
 
Join Date: Feb 2005
Location: Dallas TX
Posts: 623
Thanks: 68
Thanked 165 Times in 122 Posts
Default

Quote:
Originally Posted by Kmelander View Post
The race shop finished up my engine last week so I took a ride up on Friday to see a couple of pulls.
What did the details/specs end up being for the motor?
Reply With Quote
  #96  
Old 08-15-2021, 09:06 AM
Kmelander Kmelander is offline
Senior Member
 
Join Date: Jan 2017
Posts: 104
Thanks: 43
Thanked 92 Times in 58 Posts
Default

Quote:
Originally Posted by ScotI View Post
What did the details/specs end up being for the motor?
  • 4.030" bore, 4" stroke, Forged crank (eagle I think), Forged H-beam rods, ARP-2000 rod bolts, ARP main studs, I believe zero decked.
  • -12cc inverted dome pistons, 10.5:1 static CR
  • TFS GenX 220 cathedral Heads with Ti retainers (assembled), 65cc, 2.055" intake vlv., 1.57" ex. vlv.
  • Holley UltraXP 750 Carb
  • Comp Ultra Gold Rockers
  • Edelbrock LS1 dual-plane Intake Manifold
  • Cam Motion 231/237 duration @ .050'', 116.5 LSA, 113 ICL (116.5+3.5) , .621''/.612'' lift with 1.7 rockers
  • Hamburger 1" carb spacer
  • MSD LS Ignition

About $12.3k on the dyno.
Reply With Quote
  #97  
Old 09-01-2021, 04:12 PM
Kmelander Kmelander is offline
Senior Member
 
Join Date: Jan 2017
Posts: 104
Thanks: 43
Thanked 92 Times in 58 Posts
Default

Finished up a little more body work around the trunk area. Patched up the gutter channels and welded up the tail light panel body seams plus a coat of filler over the welds.
Attached Images
          
Reply With Quote
The Following 2 Users Say Thank You to Kmelander For This Useful Post:
Roscoe03 (09-02-2021), syborg tt (09-13-2021)
  #98  
Old 10-12-2021, 12:13 PM
Kmelander Kmelander is offline
Senior Member
 
Join Date: Jan 2017
Posts: 104
Thanks: 43
Thanked 92 Times in 58 Posts
Default

Bit more progress to report. I've got the dash repaired and back in the car, which was a good bit of work. I gave the dash and firewall the same treatment as my inner quarters. Also finalized the cage. Added a few more bars and gussets. I'm working on the transmission cut-out now.
Attached Images
    
Reply With Quote
  #99  
Old 01-12-2022, 10:02 AM
Kmelander Kmelander is offline
Senior Member
 
Join Date: Jan 2017
Posts: 104
Thanks: 43
Thanked 92 Times in 58 Posts
Default

short update - Still working on the old girl. Lots of prep, making and spray-work.
Attached Images
   
Reply With Quote
The Following User Says Thank You to Kmelander For This Useful Post:
Roscoe03 (01-16-2022)
  #100  
Old 01-12-2022, 11:43 AM
ScotI ScotI is offline
Senior Member
 
Join Date: Feb 2005
Location: Dallas TX
Posts: 623
Thanks: 68
Thanked 165 Times in 122 Posts
Default

Progress is nice. Thanks for sharing the updates.
Reply With Quote
The Following User Says Thank You to ScotI For This Useful Post:
Kmelander (01-12-2022)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:31 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net