Go Back   Lateral-g Forums > Technical Discussions > How To's, Tips, and Tricks
User Name

Thread Tools Display Modes
Old 04-06-2016, 01:37 PM
David Pozzi's Avatar
David Pozzi David Pozzi is offline
Senior Member
Join Date: Sep 2005
Posts: 562
Thanks: 2
Thanked 48 Times in 14 Posts

I'm using a cheap siphon sand blast gun in mine. I have 170 psi shop air available but I found the media flow is reduced at that pressure. The pressure backs up in the gun. I use a regulator to around 90 psi and get a better media flow.
Drilling out the air jet can cause so much air to flow, you don't get as much suction on the media hose. I put a vacuum gauge on mine to set pressure.
Reply With Quote
Old 09-08-2018, 06:32 PM
minendrews68 minendrews68 is offline
Senior Member
Join Date: Oct 2009
Location: N.E. Arkansas
Posts: 170
Thanks: 2
Thanked 13 Times in 11 Posts

Where are you guys getting the replacement clear covers that go over the window. Harbor Freight doesn't carry them. As a Matter of fact Harbor Freight doesn't carry any kind of replacement parts. I bought a soldering gun and the tip burned into. Went back to HF and was told that the soldering gun was a expendable item so they did not carry the tips as a replacement. go figure!
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 07:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright Lateral-g.net