The car was and untouched all original paint, runs included rust free slant six, three spd on the floor with black interior and black vinyl top. burned orange metallic paint and magnum500s. all original component except the radiator and the painted bumpers. the spare tire has never been used, the white letter are still on the tread and all tits intact. the car was a second owner car when I bought it and would be now 4 owner total with Jack Wur as the current owner. I own the car for about 2 months and put about 500 miles on it when I was introduced to Jack Wur through a common friend of ours Wayne Halabura who is well known for his own high end hotrods. I then sold the car to Jack Wur and immediately started to tear down the car.10 solid months of work myself with help from: Bruce williams who was the artistic designer, he did the renderings the paint scheme design, the interior design as well as the two tone lay out. my dad Jake thiessen did alot of fabrication, disassembly, assembly. jason Wur (Jacks son) fabrication, assembly, fabricated the trunk panels. Abe fehr, painted the entire bottom side of the car for me. Andrew Feris wet sanded and polished the entire car. Mark at Braithwaites upholstery did all the leather wrapping of the interior panel. The whole car was turn key built In my restoration shop Creative Concepts & Restorations in warman, Saskatchewan Canada, with the exception of the bottom side of the car being sprayed at Dodge city Saskatoon. with the help of many talented individuals. Jack Wur is an absolute stand up guy, building cars with him has been an absolute thrill. He is a restoration shops perfect customer. He allows me to build his cars as though they are my own. He has very high standards in workmanship but leaves the detail and creativity largely up to us. I half jokingly tell everyone that" its my car Jack just owns it. It takes an incredible customer to see a project of this nature through inside of a year.

specifics:

Magnum force front suspension
wilwood disk brakes front and rear
Mopar 426 Hemi
dual Edelbrock thunder series carbs
TKO 600 5spd trans
Fully hydrolic clutch
Bear Ford 9" with 4:11 gears auburn possie
4bar custom rear suspension with watts link
foose custom wheel 18x8 20x10
08 corvette Z06 power seats
custom rear seat delete
tti headers
motor plate
Ron Davis Radiator and fans
Two Tone leather interior with suede inserts
Custom billet interior trim pieces
Car was built in 10 months start to finish

Everything shaved: no maker lights, door handles, trunk lock relocated behind license plate.  bumperettes removed.  bumpers narrowed tucked, shrunk and frenched in. rear valance scratch built, scratch built billet grills top and bottom with fog lights. all chassis holes and body hole filled(150aprox) side exit 3" exhaust and chrome tips. all fender mounting lips and structure trimmed for cleaner appearance. rad suport boxed and grill finish panel fabricated. rear taillight bezels removed and fabricated out of sheetmetal for seamless fit.  all panels fully gapped for consistent fit.  body completely panel blocked for perfect body panel image line. custom fabricated interior, billet interiors trim pieces from door panel to panel. custom console. refaced gauges and needles. custom fiberglass molded rear seat delete panels. fabricated and leather wrapped trunk panels. all engine bay electrical and plumbing concealed. custom fabricated march serpentine pulleys. milled and smoothed aluminum hemi valve covers. cnc milled custom floor pedals. fully wetsanded and polished body panels,80 hours on exterior panels alone. entire car is base clear even the inside of the fenders and fender wells have been body worked primed sanded painted and even some polished. Camaro fuel tank.  all brake lines fuel lines and wiring are all hid in body panels and frame rails ect. all new custom grey tint glass. three tone PPG base clear paint, nearly 4gallons of silver basecoat and 2gallons of green basecoat. polished ceramic coated exhaust front to back.

owner: Jack Wur, Saskatoon, Saskatchewan Canada
builder: Byron Thiessen of Creative Concepts & Restorations, warman, Saskatchewan Canada 306-292-6008