WE are working on a Billet steering arm / bump steer kit that will hopefully solve this issue.
it will use a 5/8 heim outer and a long ti e rod sleeve.
the problem is. we can only move the steering arm so much. and there is alot of different rim profiles. PLUS as you increase the back space the rim gets smaller ID. also you need to realize that the Sway bar becomes the limiting factor on the back space.
with a stock sub an stock (replacement) sway bar i would be surprized if you could fit much more than 5.5 bs wheel on there.
there really is only so much you can do.
Something about 5 lb of S%$t in a 2 lb bag.
|